Whirlpool Washer

Repair Articles

All results

About 1138 results

Preventing Excessive Lint on a Washer Load
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Excessive_Lint_on_a_Washer_Load
Washing new clothing inside out will help reduce the amount of lint in the cycle. Lint can be trapped in the load if the washer is tightly packed. Always check all pockets and the interior of the wash...

Leveling a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Leveling_a_Front_Load_Washer
When the washer is on a pedestal, the feet must be removed from the washer before installing it onto the pedestal. The black pedestal pads should be securely placed between the top of the pedestal and...

Lid Locking on a Top Load High Efficiency Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Lid_Locking_on_a_Top_Load_High_Efficiency_Washer
Lid Locking (or not Locking) on your Whirlpool Top Load HE Washer? The lid must be closed for the washer to fill with water, wash, drain, rinse and spin the load. Close the washer lid before starting ...

Water Usage in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Water_Usage_in_a_Top_Load_HE_Washer
If you feel that the washer level is lower than when you first started using this washer, try running a Clean Washer cycle. You should run this cycle approximately 1 time per month (using the Affresh®...

How to Remove Odors from a Washer
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Cleaning_and_Care/How_to_Remove_Odors_from_a_Washer
The Clean Washer cycle uses higher water volumes in combination with Affresh® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. Always leave the washer lid or door...

Alexa Washer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Product_Info/Connected_Support/Using_Alexa_with_Your_Appliances/Alexa_Washer_Commands
Alexa Washer Commands Start Washer Alexa, Tell Whirlpool to Start the Washer Stop Washer Alexa, Tell Whirlpool to Stop the Washer Pause Washer Alexa, Tell Whirlpool to Pause the Washer Alexa, Tell Whi...

Removing Odors from the Interior of a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Removing_Odors_from_the_Interior_of_a_Washer
The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. This washer has a special cycle th...

Not Cleaning Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Not_Cleaning_Clothing_-_Washer
Make sure that the hot water inlet hose is connected to the hot water supply and that the cold water inlet hose is connected to the cold water supply. If you feel that the clothes are not coming clean...

Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer

Excessive Suds in a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Excessive_Suds_in_a_Front_Load_Washer
If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of removing suds. If you see "Sud" or "Sd" and the Cycle Complete light is on, the washer detected too many suds d...

Washer Odor or Smell - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Odor_or_Smell/Washer_Odor_or_Smell_-_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine b...

Slower Spin Speeds on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Slower_Spin_Speeds_on_a_Front_Load_Washer
Your washer is designed so that in certain cycles, such as delicate or handwash cycles, the spin speeds are slower. In these cycles, more water is retained in the load at the end of the cycle to keep ...

START/PAUSE (Washer) - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Control_Panel_Operation_(on_some_models)/27_Inch_Models/START%2F%2FPAUSE_(Washer)_-_Stacked_Laundry_Center
Press the START/PAUSE button to start the washer. If you need to open the lid to add one or two missed garments: Press the START/PAUSE button. The lid will unlock once the washer movement has stopped....

Cycles, Options, and Modifiers on a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Cycles%2C_Options%2C_and_Modifiers_on_a_Top_Load_HE_Washer
STEAM CLEAN The Steam Clean option adds additional soak and wash time to many cycles to help remove tough stains, as well as a steam boost for added cleaning power. As you touch the Soil Level pad, th...

HE Detergent use in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/HE_Detergent_use_in_a_Washer
If there is not enough detergent for the soil level in the load or the water hardness, then soils can redeposit onto the load. Use more detergent for washing heavy soils in cold or hard water, followi...

Leveling a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Leveling_a_Top_Load_Washer
If the washer is not level, water can splash off the top of the basket or the load. Make sure that all four front feet are installed, the washer is level front to back and side to side. Plastic Feet: ...

Electrical Supply Needed for a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Electrical_Supply_Needed_for_a_Washer
Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Ground Fault Circuit Interrupter. If the washer is on a f...

Using Single Dose Laundry Packets in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Using_Single_Dose_Laundry_Packets_in_a_Washer
If packets are placed in dispensers of either HE top-load or HE front-load, the dispensers may clog and cause an overflow Packets can get caught in the bellows in HE front-load if not put in the back ...

Cleaning Washers with affresh®
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_Washers_with_affresh%C2%AE
The affresh ® tablets are designed to dissolve slowly throughout the Clean Washer cycle to give a long thorough cleaning. If you washer does not have a "Clean Washer" cycle, use the highest water leve...

Error Codes in Front Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Front_Load_Washers
When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. The household water supply is turned on and both the cold and the hot water faucets or valve...

Checking the Fill Hoses if the Washer is not Filling
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Checking_the_Fill_Hoses_if_the_Washer_is_not_Filling
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

Front Load Washer Door Will Not Open
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_Washer_Door_Will_Not_Open
If during installation the washer was plugged in and turned on without water hoses attached and turned on, the washer may attempt to drain for 8-10 minutes before the door unlocks. If the washer has a...

What is an F20 or FH Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F20_or_FH_Error_Code_on_a_Front_Load_Washer
If a cold water wash is selected, the washer is designed to add hot water to keep the temperature optimal for cold wash performance (75°F +/-10°).If you want to save energy by not connecting to the ho...

Moving a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Moving_a_Front_Load_Washer
Moving a Whirlpool Front Load Washer New shipping bolts must be reinstalled to avoid internal suspension and structural damage to your washer during transport. We recommend an Authorized Service Techn...

Front Load washer is not Draining, not Spinning, or Leaving Wet Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_washer_is_not_Draining%2C_not_Spinning%2C_or__Leaving_Wet_Loads
Common reasons for a Whirlpool Front Load washer not draining, not spinning, or leaving wet loads at the end of the cycle: In these cycles, more water is retained in the load at the end of the cycle t...

HE Detergent Use in the All-in-One Washer and Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Product_Assistance/HE_Detergent_Use_in_the_All-in-One_Washer_and_Dryer
If there is not enough detergent for the soil level in the load or the water hardness, then soils can redeposit onto the load. Using non-HE detergent can cause oversudsing, and cause longer cycle time...

Preventing Damaged Clothing in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Damaged_Clothing_in_a_Top_Load_HE_Washer
This cycle starts with a soak to thoroughly saturate your large load, followed by medium wash action and medium spin speeds to maintain load balance. Always follow the instructions on the care label o...

Keeping a Front Load Washer Fresh
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Keeping_a_Front_Load_Washer_Fresh
How to Keep your Whirlpool Front Load Washer Fresh The washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses. Leaving a load in the ...

Linting in Front Load Washer when Using the Wash & Dry Option
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Product_Assistance/Linting_in_Front_Load_Washer_when_Using_the_Wash_%26_Dry_Option
When using the “Wash & Dry” option, you may notice more lint on your clothing and/or inside of the washer, than a traditional wash only cycle. Since the washer is doing both the washing and the drying...

Humming or Whirling - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Humming_or_Whirling_-_Noise_-_Washer
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

VIDEO: HE Top Load Washer - Floating Washer Basket
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__HE_Top_Load_Washer_-_Floating_Washer_Basket
How your Whirlpool Floating Washer basket works

Preferences - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Preferences_-_Washer
The "Preferences" section of the app allows you to set up which notifications that you would like to receive. When the washer’s Precision Dispense drawer is low on detergent, your phone will send you ...

Lint on Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Lint_on_Clothing_-_Washer
The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to move freely. A tightly packed load of laundry is more likely...

Preferences - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Preferences_-_Washer
The "Preferences" section of the app allows you to set up which notifications that you would like to receive. When the washer’s Precision Dispense drawer is low on detergent, your phone will send you ...

Long Cycles on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Long_Cycles_on_a_Front_Load_Washer
The time displayed during a cycle is an estimate of the time to complete the load. The excess suds can cause the washer to run at a reduced spin speed, which will result in very wet loads. The washer ...

Checking the Fill Hoses if your Washer is not Filling
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Installation_Support/Checking_the_Fill_Hoses_if_your_Washer_is_not_Filling
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Top_Load_Washer_not_Draining%2C_not_Spinning%2C_and%2F%2For_Leaving_Wet_Loads
Use the U-shaped drain hose form on the drain hose, and secure the drain hose. Is the end of the drain hose more than 96" (244 cm) above the floor? Your washer will not be able to adequately pump the ...

Damaged Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Damaged_Clothing_-_Washer
Mend rips and broken threads in seams before washing items to help avoid damage to clothing. Also check inside the washer for loose items that could snag fabrics and damage clothing. Were strings, sas...

Grinding or Rubbing - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Grinding_or_Rubbing_-_Noise_-_Washer
Typically, a grinding or rubbing noise will only occur in the agitation/wash or spin portions of the cycle. The noise this washer makes could become worse if the machine is unlevel. It is important to...

Washing Large Loads or Bulky Items in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Washing_Large_Loads_or_Bulky_Items_in_a_Washer
Washing Large Loads or Bulky Items in your Whirlpool Washer Always select the Bulky cycle when washing large items or heavy items. Oversized items, Water Resistant Materials or a large unevenly distri...

VIDEO: Washer Hose Noise
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Washer_Hose_Noise
Whirlpool Washer Hose Noise

Auto Sensing in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Auto_Sensing_in_a_Top_Load_HE_Washer
When the Start button is pressed, the washer will first perform a self-test on the lid lock. The washer will then move the load briefly, pause to allow water to soak into the load, and resume adding w...

Lid Not Latching - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating/Lid_Not_Latching_-_Top_Load_Washer
When the Start/Pause button is touched, the washer will first perform a self-test on the lid lock mechanism. You will hear a click, the basket will make a slight turn, and the lid will unlock briefly ...

Remote Control - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Remote_Control_-_Washer
Remote Control Remote Control What it does: Remotely start and pause the washer using the Smart Appliances app. What it does for you: Lets you have freshly washed laundry when you’re home and ready fo...

VIDEO: How to Level a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Level_a_Washer
Leveling your Whirlpool Washer

Cleaning a Front Load Washer Door Seal
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_a_Front_Load_Washer_Door_Seal
Inspect the gray-colored seal between the door opening and the basket for soiled areas. Pull back the seal to inspect all areas under the seal and to check for small items. Use affresh ® tablets to ke...

Lid Lock is Not On - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Not_On_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

Latching a Front Load Washer Door
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Latching_a_Front_Load_Washer_Door
Close the washer door by pushing it firmly until the latch clicks. Open and close the door firmly, the door must be completely closed and latched for the washer to operate. Be sure that clothing items...

Top Load HE Washer is Unbalanced or Overloaded
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Top_Load_HE_Washer_is_Unbalanced_or_Overloaded
Is Your Whirlpool Top Load Washer Unbalanced or Overloaded? A large unbalanced load could result in a reduced spin speed and wet clothes at the end of the cycle. If clothing gets out of balance, there...

Using the FanFresh Option on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Using_the_FanFresh_Option_on_a_Front_Load_Washer
FanFresh® keeps your clothing fresh inside the washer after a cycle is complete until you have a chance to remove them, It does this by tumbling the drum occasionally to keep the clothing from settlin...

Using the Corner Dispensers in a Top Load HE washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Using_the_Corner_Dispensers_in_a_Top_Load_HE_washer
About two tablespoons of water could remain in the chlorine bleach or fabric softener dispenser at the end of the cycle. Liquid chlorine bleach automatically dispenses toward the end of the wash to en...

VIDEO: How to use an HE washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_use_an_HE_washer
Using your Whirlpool High Efficiency (HE) Washer

Rattling - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Rattling_-_Noise_-_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

Should Flood Safe Devices be Used on a Washer?
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Should_Flood_Safe_Devices_be_Used_on_a_Washer%3F
Using Flood Safe Devices on a Whirlpool Washer Whirlpool recommends that appliances be direct connected to the water supply for optimum machine performance. Check with the manufacturer of the device t...

Changing the Language on Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Changing_the_Language_on_Whirlpool_Washer
If your washer is displaying the incorrect language or you would like to change the language displayed on the console, complete the following steps: While on the language selection screen, press the "...

6. Utility Cycles - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/6._Utility_Cycles_-_Front_Load_Washer
Clean Washer - Use this every 30 washes to keep the inside of your washer fresh and clean. Use with affresh® Washer Cleaner tablets or liquid chlorine bleach to thoroughly clean the inside of your was...

Water Heard in Washer, but not Seen - Balance Ring Information
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Water_Heard_in_Washer%2C_but_not_Seen_-_Balance_Ring_Information
Water heard in the washer but not seen when the tub is moved is from the balance ring in the washer. The balance ring is a fluid filled ring at the top of the tub. The fluid in the balance ring shifts...

Lint on Clothing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Lint_on_Clothing/Lint_on_Clothing_-_Front_Load_Washer
When you are using the “Wash & Dry” option, you may notice more lint on your clothing and/or inside of the washer than a traditional wash only cycle. Since the washer is doing both the washing and the...

Error Codes in Top Load HE Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Top_Load_HE_Washers
This code will appear at the end of the wash cycle to indicate that the cold water hose is connected to the hot water inlet, and the hot water hose is connected to the cold water inlet. Check the wate...

Alexa All-in-One Washer-Dryer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Product_Info/Connected_Support/Using_Alexa_with_Your_Appliances/Alexa_All-in-One_Washer-Dryer_Commands
Alexa Washer Commands What's the Command? Alexa, Tell Whirlpool to Start the Combo Alexa, Tell Whirlpool to Stop the Combo Alexa, Tell Whirlpool to Pause the Combo Alexa, Tell Whirlpool to Turn Quiet ...

VIDEO: Install Washer on Level Ground
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Install_Washer_on_Level_Ground
Install your Whirlpool Washer on Level Ground

Top Load Washer Basket has Vibration or Unbalanced Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Top_Load_Washer_Basket_has_Vibration_or_Unbalanced_Loads
Whirlpool Top Load Washer Basket has Vibration or Unbalanced Loads Vibration in the washer basket: The washer basket will move while the washer is operating. It is normal for the washer basket to move...

Not Rinsing Well - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Not_Rinsing_Well/Not_Rinsing_Well_-_Front_Load_Washer
From the home screen, touch the Options icon (at the upper right of screen), and the Options screen will show Soil Level, Extra Rinse, Pre-Soak, FanFresh®, Steam Clean, and Wrinkle Shield™ selections....

VIDEO: Normal Top Load Washer Fill Sound
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Normal_Top_Load_Washer_Fill_Sound
Normal Washer Fill Sound on my Whirlpool Top Load Washer

uL - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/uL_-_Error_Code_-_Washer
Your washer is off balance or the load is unbalanced If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE. You may also experience some vibra...

Clean Washer with affresh® - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_Front_Load_Washer
This washer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer. Add an affresh ® Washer Cleaner tablet to the ...

Properly Moving the Washer - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Properly_Moving_the_Washer_-_Top_Load_Washer
If the washer is moved during freezing weather, follow WINTER STORAGE CARE directions before proceeding. Disconnect drain from the drain system and drain any remaining water into a pan or bucket. Drap...

What is an F21 or F02 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F21_or_F02_Error_Code_on_a_Front_Load_Washer
What is an F21 or F02 Error Code on my Whirlpool Front Load Washer? Use the U-shaped drain hose form on the drain hose, and secure the drain hose. The excess suds will slow or stop the removal of wate...

VIDEO: How to Install Washer Drain Hose
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Install_Washer_Drain_Hose
Installing a Whirlpool Washer Drain Hose

Clean Washer with affresh® - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_Front_Load_Washer
This washer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer. Add an affresh ® Washer Cleaner tablet to the ...

Normal Washer Noises - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Normal_Washer_Noises_-_Front_Load_Washer
Normal Sounds of your Whirlpool Front Load Washer Your washer may make sounds that are different from your old washer, especially if you had a top load washer prior to this. Click the links below to h...

Normal Washer Noises - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Normal_Washer_Noises_-_Front_Load_Washer
Normal Sounds of your Whirlpool Front Load Washer Your washer may make sounds that are different from your old washer, especially if you had a top load washer prior to this. Click the links below to h...

What is an F7 E1 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F7_E1_Error_Code_on_a_Front_Load_Washer
This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. All four (4) shipping bolts and the plastic spacers must be removed from the rear ...

Unclogging a Front Load Washer Dispenser Drawer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Unclogging_a_Front_Load_Washer_Dispenser_Drawer
Remove the dispenser, by pressing the release lever and rinse leftover detergent or additives that could clog the flow of water through the dispenser. Liquid or powdered color-safe bleach or oxi produ...

Using the Electronic Control on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Using_the_Electronic_Control_on_a_Top_Load_Washer
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. When using the touch control, touch on the name to operate, not the lights. The lights show which cy...

VIDEO: How to Install Washer Drain Hose
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Videos/VIDEO%3A__How_to_Install_Washer_Drain_Hose
Installing the Washer Drain Hose to your Whirlpool Stacked Laundry Center If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

VIDEO: Loading a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Loading_a_Top_Load_HE_Washer
Loading your Whirlpool Top Load HE Washer

lid - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/lid_-_Error_Code_-_Washer
Possible Solutions Is the lid open? Did the washer drain out? If lid (Lid opened) appears in display, the washer lid was left open. Close the lid to clear the display. If the lid is left open for more...

LF - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/LF_-_Error_Code_-_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either of these error codes may indicate there is so...

oL - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/oL_-_Error_Code_-_Washer
Possible Solutions Is the Washer overloaded? If oL (overloaded) appears in display, the load too large. If an overload is detected, the washer will drain any water and detergent in the washer. Remove ...

Control Knobs on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Control_Knobs_on_a_Top_Load_Washer
Using the Control Knobs on a Whirlpool Top Load Washer Select the cycle most appropriate for the load being laundered. Select from the console the soil level for the clothes being laundered (#7 on pic...

dU - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/dU_-_Error_Code_-_Washer
Possible Solutions Are there items on the lid? If dU (Lid cannot unlock) appears in display, the washer detects that there are objects on washer lid preventing it from unlocking. Remove objects, such ...

Unlocking a Front Load Washer Door When it is Locked at Install
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Unlocking_a_Front_Load_Washer_Door_When_it_is_Locked_at_Install
If you have unboxed your front load washer to find that the door is locked and you are unable to open it, please review the following instructions. Please be sure the drain hose is installed in a drai...

No Power - No Operation - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Operation/No_Power_-_No_Operation_-_Washer
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Gr...

Precision Dispense Ultra in a Front Load washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Precision_Dispense_Ultra_in_a_Front_Load_washer
You can check to see the amount of HE detergent left in the cartridge by either visually looking at the cartridge or you can press the PRECISION DISPENSE button and view the status on the display. If ...

Washers
https://producthelp.whirlpool.com/Laundry/Washers

VIDEO: Sound of Front Load Washer Drain
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Sound_of_Front_Load_Washer_Drain
Normal Sounds of your Whirlpool Washer Draining

Clean Washer with affresh® - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_All-In-One_Washer_Dryer
This washer/dryer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer/dryer. . After the cycle is complete, lea...

Clothing is Wrinkled - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Clothing_is_Wrinkled_-_Top_Load_Washer
Make sure the hot-water inlet hose is connected to the hot-water faucet and that the cold-water inlet hose is connected to the cold-water faucet. To reduce tangling and twisting, the load items need t...

SUD or Sd - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/SUD_or_Sd/SUD_or_Sd_-_Front_Load_Washer
The washer will not be able to spin out water with the excess suds. When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. The excess suds can caus...

Grinding Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Grinding_Noise_-_Top_Load_Washer
It is important to follow the steps in the installation instructions for leveling the washer. It is important that the clothes have enough room to move around freely to allow the wash basket room to m...

Sd or 5d - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Sd_or_5d_-_Error_Code_-_Washer
Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the ...

Front Load Washer Dripping Water from the Door
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_Washer_Dripping_Water_from_the_Door
The door seal is the rubber "gasket" inside the door. Remove and clean any dirt or deposits around the inner door seal with a damp cloth. The door glass seals against the rubber seal; dirt or deposits...

VIDEO: How the Lid Locks on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_the_Lid_Locks_on_a_Top_Load_Washer
Lid Locking on your Whirlpool Top Load Washer Refer to the video below for the sound the lid makes when it locks:

VIDEO: Changing the Language on a Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Changing_the_Language_on_a_Whirlpool_Washer
Changing the Language on a Whirlpool Washer

VIDEO: Water in the Front Load Washer Dispenser
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Water_in_the_Front_Load_Washer_Dispenser
Water in the Dispenser on my Whirlpool Front Load Washer

VIDEO: Sound of Front Load Washer Spinning
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Spinning
Normal Sounds of your Whirlpool Washer Ramping up to Spin, then High Speed Spin Ramp up to Spin: Top Spin Speed:

All-in-One Washer and Dryer taking a Long Time to Dry
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Product_Assistance/All-in-One_Washer_and_Dryer_taking_a_Long_Time_to_Dry
Because the Ventless dry system has nowhere to vent the moist air, your clothing may still feel slightly damp at the end of the cycle. If installed in a closet, the closet doors must have ventilation ...

What is an F8 E2 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F8_E2_Error_Code_on_a_Front_Load_Washer
F8 E2 Code in display on your Whirlpool Front Load Washer There is a problem with the Dispenser System: Press down on the release tab and pull straight out to remove the dispenser. Wash dispenser and ...

Alexa Washer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Other_Info/Help_with_Alexa/Appliance_Commands/Alexa_Washer_Commands
Alexa Washer Commands Alexa Washer Commands What's the Command? Start Washer Alexa, Tell Whirlpool to Start the Washer Stop Washer Alexa, Tell Whirlpool to Stop the Washer Pause Washer Alexa, Tell Whi...

VIDEO: Sound of Front Load Washer Fill and Wash
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Sound_of_Front_Load_Washer_Fill_and_Wash
Normal Sounds of your Whirlpool Washer Filling and Washing

VIDEO: Tips to Keep a Washer Performing at its Best
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Tips_to_Keep_a_Washer_Performing_at_its_Best
Tips to Keep your Whirlpool Washer Performing at its Best

Won't Start - Has Power - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Operation/Won't_Start_-_Has_Power_-_Washer
If the control lock feature is activated the control lock light will be on. CLICK HERE for more information on the lid locking You may need to press and hold the start button for up to 3 seconds to en...

Preventing Excessive Lint from Clothing
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Tips_and_Tricks/Preventing_Excessive_Lint_from_Clothing
There are several causes for lint on clothing; following are tips for reducing the amount of lint in your clothes: Washing new clothing inside out will help reduce the amount of lint in the cycle. Alw...

VIDEO: Normal Basket Movement On Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Normal_Basket_Movement_On_Top_Load_Washer
Basket Movement On your Whirlpool Top Load Washer

Sd or SUD - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/Sd_or_SUD_-_Front_Load_Washer
If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of removing suds. If you see "Sud" or "Sd" and the Complete Cycle light is on, the washer detected too many suds d...

VIDEO: Using Precision Dispense on a Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Using_Precision_Dispense_on_a_Whirlpool_Washer
Using the Precision Dispense System on a Whirlpool Washer

VIDEO: Using Delay Wash on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Using_Delay_Wash_on_a_Front_Load_Washer
Using Delay Wash on your Whirlpool Front Load Washer

VIDEO: Using Delay Wash on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/VIDEO%3A__Using_Delay_Wash_on_a_Front_Load_Washer
Using Delay Wash on your Whirlpool Front Load Washer

VIDEO: Using the Drawer Dispenser on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Using_the_Drawer_Dispenser_on_a_Top_Load_Washer
How to Use the Drawer Dispenser on your Whirlpool Top Load Washer

VIDEO: Front Load Washer with Wash & Dry Option
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Videos/VIDEO:_Front_Load_Washer_with_Wash_%26_Dry_Option
The Wash & Dry Option in your Whirlpool Front Load Washer

VIDEO: How to Install Whirlpool Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Top_Load_Washer
How to Install Whirlpool Top Load Washer

Service and Support - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Service_and_Support_-_Washer
Service and Support Service and Support What it does: If you have a question about your washer or if you need service, the "Service and Support" section of the app provides our Customer Support phone ...

Ld - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Ld_-_Error_Code_-_Washer
If Ld (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. Lower drain hose if the end is higher than 96" (2.4 m) above the floor. See Installatio...

Washer is Leaving Clothes Discolored or with Dye Transfer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Washer_is_Leaving_Clothes_Discolored_or_with_Dye_Transfer
Whirlpool Washer is Leaving Clothes Discolored or with Dye Transfer Dye transfer can occur when mixing colors in a load. Use the following tips to help prevent dye transfer: Mixing different colors ma...

Knocking or Thumping - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Knocking_or_Thumping_-_Noise_-_Washer
Typically, a knocking or thumping noise will only occur during agitation/wash, and spin portions of the cycle. There will be a knocking/thumping noise as the drive system shifts from agitation mode to...

VIDEO: How to Install Whirlpool Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Front_Load_Washer
How to Install Whirlpool Front Load Washer

Humming or Whirling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Humming_or_Whirling_Noise_-_Top_Load_Washer
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

Clicking or Clacking - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Clicking_or_Clacking_-_Noise_-_Washer
Possible Solutions Washer makes a clicking or clacking type noise Typically, a clicking or clacking noise will only occur at the start of a cycle. Most likely it is the sound of the lid locking. CLICK...

Not Cleaning Clothing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Not_Cleaning_Clothing/Not_Cleaning_Clothing_-_Front_Load_Washer
Are you using the correct cycle selection and temperature for the fabric being washed? Always follow the instructions on the care label of the garment before washing in your machine. CLICK HERE for mo...

Normal, Delicate, Eco or Quick Wash Cycles - Water Level - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Water_Level/Normal%2C_Delicate%2C_Eco_or_Quick_Wash_Cycles_-_Water_Level_-_Washer
Delicate or Hand Wash cycle will result in a deeper fill wash, - the washer will fill about 1/2 full. Whites, Heavy Duty, Deep Water Wash, Power Wash, and Super Wash will also fill to about 1/2 full. ...

Gurgling or Slurping - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Gurgling_or_Slurping_-_Noise_-_Washer
Possible Solutions Gurgling or Slurping Noises: Typically, a gurgling or slurping noise will only occur during the drain portion of the cycle. During draining, the washer pump will continuously run to...

VIDEO: How to Install Whirlpool Washer Pedestal
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Washer_Pedestal
How to Install Whirlpool Washer Pedestal

Excessive Detergent or Suds - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Excessive_Detergent_or_Suds_-_Top_Load_Washer
Using non-HE detergent or more than the manufacturer's recommended amount of detergent can cause excessive suds. The excess suds can cause the washer to run at a reduced spin speed, resulting in very ...

Vibration During Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Vibration/Vibration_During_Cycle_-_Top_Load_Washer
Always check the care label to make sure that the item is machine washable in a top load washer (some bulky items state to only wash in a front load commercial-style washer). If a drain pan is used un...

Grinding or Rubbing Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Grinding_or_Rubbing_Noise_-_Top_Load_Washer
Typically, a grinding or rubbing noise will only occur in the agitation/wash or spin portions of the cycle. It is important to follow the steps in the installation instructions for leveling the washer...

Moving a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Moving_a_Front_Load_Washer
If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. Disconnect drain hose from drain system and from back of washer. your washer, it must be properly ...

VIDEO: Sound of Front Load Washer Door Lock and Unlock
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Door_Lock_and_Unlock
Clicking Sound on Whirlpool Front Load Washer - Door Lock Sound and Door Unlock Sound NOTE: Door Unlock includes End of Cycle Signal

Sud - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/Sud/Sud_-_Error_Code_-_Top_Load_Washer
Possible Solutions Did you receive a Sud error code? If Sud (excess suds) appears in display, you have excessive suds in washer. Be sure to always use HE High Efficiency Detergent in the washer. CLICK...

Clothes are Tangled - All in One Washer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Clothes_are_Tangled_-_All_in_One_Washer
Were you washing just one type of garment in the load? Did you load the washer as recommended in the Owner's Manual? Place a load of sorted clothes loosely in the washer. To reduce tangling and twisti...

VIDEO: Setting Detergent Concentration in a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Setting_Detergent_Concentration_in_a_Front_Load_Washer
Setting Detergent Concentration in your Whirlpool Washer

VIDEO: Sound of Front Load Washer Door Lock and Unlock
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Door_Lock_and_Unlock
Clicking Sound on Whirlpool Front Load Washer - Door Lock Sound and Door Unlock Sound NOTE: Door Unlock includes End of Cycle Signal

Clothes are Tangled - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Clothing_Wrinkled_or_Tangled/Clothes_are_Tangled_-_Front_Load_Washer
Were you washing just one type of garment in the load? Loads tend to tangle or twist when washing loads of one type of garment, such as long-sleeve shirts. Place a load of sorted clothes loosely in th...

Utility Cycles - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Utility_Cycles/Utility_Cycles_-_Front_Load_Washer
Press this icon to access the following utility cycles: Touch the utility cycle you wish to use and follow the screen prompts. NOTE: To get a Rinse & Spin cycle, select Drain & Spin and the Extra Rins...

What does the "SUD" or "SD" Error Code mean
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/What_does_the_%22SUD%22_or_%22SD%22_Error_Code_mean
When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. If the problem continues, and the correct amount and correct type of detergent is being used...

Water Remains in Tub or Inside Washer - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Water_Remains_After_Cycle_is_Complete/Water_Remains_in_Tub_or_Inside_Washer_-_Front_Load_Washer
If that is the case, some water may remain inside the tub, and you may see Error Codes. If there is any Error Code showing, pause the washer, and try to re-balance the load. If the cycle appears to be...

How to Clean a Front Load Washer Dispenser (Drawer)
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/How_to_Clean_a_Front_Load_Washer_Dispenser_(Drawer)
How to Clean a Whirlpool Washer Dispenser (Drawer) Unlock the dispenser drawer by pressing the Dispenser Release Lever. The inserts are the detergent selector and covers of the softener and bleach dis...

Low Water Level - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Low_Water_Level_-_All-In-One_Washer_Dryer
Does the water level seem too low? The water level on this washer should seem low because this is a low water usage washer. The water level will not be as visible as it was in your standard, deep fill...

Water Level Questions - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Water_Level/Water_Level_Questions_-_Top_Load_Washer
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

Not Cleaning Clothing - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Not_Cleaning_Clothing_-_All-In-One_Washer_Dryer
NOTE: Concentration Level does not mean the Dispenser will dispense that many doses of HE detergent; it means that the detergent you have purchased is that concentrated, and the dosage will actually b...

Cycle Status Lights - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Cycle_Status_Lights_-_Front_Load_Washer
Once the door has locked, the washer will begin spinning to sense the load size. After the load size is sensed, the estimated time based on load size will be displayed, and water will be added. The ac...

Clothes are Wrinkled - All in One Washer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Clothes_are_Wrinkled_-_All_in_One_Washer
To reduce tangling and twisting, the load items need to tumble freely in the washer. Long wash times may provide too much wash action for the size and type of load you are washing. Try selecting a low...

Selecting the Correct Cycle for the Clothes being Washed
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Selecting_the_Correct_Cycle_for_the_Clothes_being_Washed
Selecting the Correct Cycle for the Clothes in your Whirlpool Washer Are you using the correct cycle selection for fabric type? Use hot or warm washes if the warmer temperatures are safe for the fabri...

Fd - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Fd_-_Error_Code_-_Washer
Possible Solutions Fd means Factory Default settings. A Fd (Factory Default) error code indicates that the washer was set back to factory default settings. To return all options and modifiers to Facto...

Lint on Clothing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Lint_on_Clothing_-_Top_Load_Washer
The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to tumble freely. A tightly packed load of laundry is more like...

Damaged Clothing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Damaged_Clothing_-_Top_Load_Washer
Were you washing bedding, sheets, or bulky items on a Cycle other than Bulky or Sheets? This washer is designed to use the Bulky or Sheets/Bedding cycle for bulky clothing items or bedding. When washi...

VIDEO: Humming or Whirling Noise during Drain
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Humming_or_Whirling_Noise_during_Drain
The Humming/Whirling noises you would hear during the agitation/wash or spin portions of the cycle are caused by the motor. You may hear an intermittent humming/whirling noise during the agitation/was...

F8 E1 or LF or LO FL Error Code in Display
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/F8_E1_or_LF_or_LO_FL_Error_Code_in_Display
If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximate...

F22 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F22/F22_-_Front_Load_Washer
Is the washer door firmly shut? The door must be completely closed for the washer to operate. The door may look closed, but may not be latched. Verify there is no wash media (detergent, fabric softene...

FH - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/FH/FH_-_Front_Load_Washer
FH Error Code FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power. Check the following: A...

Vibration - Washing Multiple Items - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Vibration/Vibration_-_Washing_Mulitple_Items_-_Top_Load_Washer
If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the basket, which will result in noise and vibration. Always check the care label to make sur...

F20 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F20/F20_-_Front_Load_Washer
F20 Error Code F20 indicates a water inlet problem—no water or insufficient water supply. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnec...

rL or F34 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/rL_or_F34/rL_or_F34_-_Front_Load_Washer
rL or F-34 Code in display: This error code indicates that items were detected in the washer during the Clean Washer cycle. Have all items been removed before starting the Clean Washer cycle? Remove i...

Not Rinsing Well - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Not_Rinsing_Well_-_All-In-One_Washer_Dryer
CLICK HERE for more information on the use of HE Detergent If you used too much detergent, or you are laundering a load that you feel may need to have more rinsing, set the control to add extra rinses...

Int - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/Int/Int_-_Front_Load_Washer
This error code indicates that the cycle was paused or cancelled. Has the cycle been Paused or Cancelled? The washer can take 20 to 30 minutes to stop spinning and drain, and will display this error c...

Not Draining - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Draining_-_Top_Load_Washer
Verify that the drain hose is not too far down into the standpipe beyond the elbow which could cause siphoning, water to drain back into the tub or slow or no spin. Using the U-shape drain hose form (...

Clunk or Clunking - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Clunk_or_Clunking_-_Noise_-_Washer
Possible Solutions Clunk or Clunking Noises: There will be a clunk noise as the drive system shifts from agitation mode to spin mode or vise versa. These sounds are part of the normal washer operation...

Not Turning, Tumbling, or Spinning - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Not_Starting_or_Not_Operating/Not_Turning%2C_Tumbling%2C_or_Spinning/Not_Turning%2C_Tumbling%2C_or_Spinning_-_Front_Load_Washer
If Low Spin or No Spin was selected, the washer might not remove enough water from the load. The load may need to be rearranged to allow even distribution of the weight in the basket. In these cycles,...

Not Rinsing Well - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Not_Rinsing_Well/Not_Rinsing_Well_-_Compact_Front_Load_Washer
CLICK HERE for more information on the use of HE Detergent Leave enough space in the washer to allow the load to tumble freely. Clothing that is tightly packed in the washer may trap the detergent and...

VIDEO: F0 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washer
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E4 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washer
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washer
F1 E1 Error Code for Whirlpool Top Load Washers

Cleaning the Drain Pump Filter/Draining Residual Water on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water_on_a_Front_Load_Washer
Open the dispenser drawer by pulling on the handle at the base of the washer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the ho...

Clothes are Tangled - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Clothing_Wrinkled_or_Tangled/Clothes_are_Tangled_-_Compact_Front_Load_Washer
Were you washing just one type of garment in the load? Did you load the washer as recommended in the Owner's Manual? Place a load of sorted clothes loosely in the washer. To reduce tangling and twisti...

VIDEO: F6 E2 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E2_Error_Code_for_Top_Load_Washer
F6 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E3_Error_Code_for_Top_Load_Washer
F6 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F0 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washer
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E4 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washer
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washer
F1 E1 Error Code for Whirlpool Top Load Washers

F7 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F7_E1/F7_E1_-_Front_Load_Washer
This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. All four (4) shipping bolts and the plastic spacers must be removed from the rear ...

Cleaning the Drain Pump Filter/Draining Residual Water on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water_on_a_Front_Load_Washer
Open the dispenser drawer by pulling on the handle at the base of the washer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the ho...

Suds When using "No Splash" or "Easy Pour" Liquid Chlorine Bleach
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Suds_When_using_%22No_Splash%22_or_%22Easy_Pour%22_Liquid_Chlorine_Bleach
Did you use "no splash" or "easy pour" liquid chlorine bleach? This type of liquid chlorine bleach contains a thickening agent that may create excess suds in washers. If this is the case, run the wash...

Clothes are Wrinkled - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Clothing_Wrinkled_or_Tangled/Clothes_are_Wrinkled_-_Front_Load_Washer
Make sure the hot-water inlet hose is connected to the hot-water valve and that the cold-water inlet hose is connected to the cold-water faucet. To reduce tangling and twisting, the load items need to...

VIDEO: F2 E5 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E5_Error_Code_for_Top_Load_Washer
F2 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E3_Error_Code_for_Top_Load_Washer
F5 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E2 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E2_Error_Code_for_Top_Load_Washer
F5 E2 Error Code for Whirlpool Top Load Washers

Thumping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Thumping_Noise_-_Front_Load_Washer
It is necessary to remove all shipping materials for proper operation and to avoid excessive noise from washer. Front and rear feet must be in firm contact with floor, and washer must be level to oper...

Not Spinning - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Spinning_or_Wet_Clothes/Not_Spinning_-_Top_Load_HE_Washer
If not, the load may become unbalanced, causing the washer to not spin properly. If Low Spin or No Spin was selected, the washer may not remove enough water from the load. Use the U-shaped drain hose ...

Chirping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Chirping_Noise_-_Front_Load_Washer
When the washer is not on a pedestal, all four washer feet need to be in firm contact with the floor. Try to rock the washer diagonally, from corner to corner, with your hands; adjust the feet if the ...

Options - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Options_-_Front_Load_Washer
Fresh Hold®/Fresh Spin™ - The Fresh Hold®/Fresh Spin™ option will periodically tumble the load after the end of the cycle for up to 24 hours while the integrated fan circulates air through the washer ...

Chirping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Chirping_Noise_-_Front_Load_Washer
When the washer is on a pedestal, the feet must be removed from the appliance before installing it onto the pedestal. The black pedestal pads should be securely placed between the top of the pedestal ...

Not Turning, Tumbling, or Spinning - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Not_Turning%2C_Tumbling%2C_or_Spinning/Not_Turning%2C_Tumbling%2C_or_Spinning_-_All-In-One_Washer_Dryer
In these cycles, more water is retained in the load at the end of the cycle to keep delicate fabrics from shrinking and wrinkling. The excess suds can cause the washer to run at a reduced spin speed, ...

Thumping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Thumping_Noise_-_Front_Load_Washer
If the noise only occurs briefly at slow/low spin speeds, this may be caused by the bellows and its part of normal operation. It is necessary to remove all shipping materials for proper operation and ...

Controls are Not Working - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Controls_are_Not_Working_-_Top_Load_Washer
When using the touch control, touch on the name to operate, not the lights. If the Control Lock feature is activated the Control Lock light will be on. CLICK HERE for more information on the Control p...

Cleaning the Interior - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Cleaning_the_Interior_-_Front_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner, liquid chlorine b...

F5 E4 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E4/F5_E4_-_Front_Load_Washer
If the washer shows an F5 E4 Error Code, this may be an indication that the machine may have been run for 3 consecutive cycles without opening the door in between cycles. This may occasionally happen ...

Washer Keeps Draining - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Washer_Keeps_Draining/Washer_Keeps_Draining_-_Top_Load
When the washer goes into a drain routine, it will sound like it's draining for approximately 8 to 10 minutes, during which time the pump will run continuously. Check the household water supply to see...

Not Turning, Tumbling or Spinning - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Not_Turning%2C_Tumbling_or_Spinning/Not_Turning%2C_Tumbling_or_Spinning_-_Compact_Front_Load_Washer
In these cycles, more water is retained in the load at the end of the cycle to keep delicate fabrics from shrinking and wrinkling. If not, the load may become unbalanced, causing the washer to not spi...

Banging Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Banging_Noise_-_Front_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

F21 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F21/F21_-_Front_Load_Washer
Possible Solutions F21 Error Code F21 indicates a drain problem. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power. Check the follow...

Cleaning the Interior - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Cleaning_the_Interior_-_Top_Load_Washer
CLICK HERE for more information on the importance of using HE detergent Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? Run the Clean Washer cycle every month to ...

Power - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Power_-_Front_Load_Washer
Power Button Power - Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time. NOTE: Turning the Wash Cycle knob will also turn the washer on.

Not Operating or Won't Start - Has Power - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating_or_Won't_Start_-_Has_Power_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

Not Filling or Long Fill - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Filling_or_Long_Fill/Not_Filling_or_Long_Fill_-_Top_Load_HE_Washer
Check the household faucets to see if the hot and cold water household water supply lines are turned on. Use the U-shaped drain hose form on the drain hose and securely attach to drainpipe (standpipe)...

Preventing Detergent from Re-depositing on Clothing
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Detergent_from_Re-depositing_on_Clothing
Top Load HE washers are designed to use only HE High Efficiency Detergent. Run hot water in the sink nearest the washer before starting to ensure hot water in the water lines. Leave enough space in th...

Rattling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Rattling_Noise_-_Top_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

VIDEO: F8 E1 or LF Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F8_E1_or_LF_Error_Code_for_Top_Load_Washer
F8 E1 or LF Error Code for Whirlpool Top Load Washers

Rattling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Rattling_Noise_-_Top_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

Lint on Clothing - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Lint_on_Clothing_-_All-In-One_Washer_Dryer
See “Cleaning the Drain Pump Filter" in the "Cleaning and Maintenance" symptom above. If you choose not to use the Dry portion of your All-in-One Washer and Dryer, you can expect some lint on your lau...

VIDEO: F9 E1 or DRN Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F9_E1_or_DRN_Error_Code_for_Top_Load_Washer
F9 E1 or DRN Error Code for Whirlpool Top Load Washers

Clothes are Wrinkled - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Clothing_Wrinkled_or_Tangled/Clothes_are_Wrinkled_-_Compact_Front_Load_Washer
Long wash times may provide too much wash action for the size and type of load you are washing. Try selecting a lower spin speed or a cycle, such as Casual, Active Wear, or Delicate, with reduced spin...

Not Filling or Takes too Long to Fill - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Filling_or_Takes_too_Long_to_Fill_-_Top_Load_Washer
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

F5 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E3/F5_E3_-_Front_Load_Washer
This error code indicates that the door is not locking properly. The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Is there ...

Not Operating or Won't Start - Has Power - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating/Not_Operating_or_Won't_Start_-_Has_Power_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill, or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (f...

Cycle Time is Not Advancing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Cycle_Time_is_Not_Advancing/Cycle_Time_is_Not_Advancing_-_Front_Load_Washer
If the time holds constant towards the end of the cycle, this indicates the load is having a difficult time balancing, and extra time is required to balance the load for the final spin. If the wash cy...

F7 EC - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_EC_-_Front_Load_Washer
F7 EC Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Monitor the washer for one (1) minute to ensure the error code does not display again. If error co...

F0 E1 or rL - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F0_E1_or_rL_-_Front_Load_Washer
Possible Solutions F0 E1 or rL Error Code The "Clean Washer" cycle has been started, but the machine is detecting a load inside the washer. Remove any items inside the washer, then restart for your "C...

CL Code - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/CL_Code_-_Front_Load_Washer
Possible Solution Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cyc...

ob - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/ob_-_Front_Load_Washer
You may notice the cycle time was longer than initially displayed, or the clothing is still dripping wet, this is because a sizeable unbalanced load could result in reduced spin speeds. Remove a few o...

Vibration - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Vibration_and_Sounds/Vibration_-_All-In-One_Washer_Dryer
Front and rear feet must be in firm contact with floor, and washer/dryer must be level to operate properly. If Washer/Dryer rocks back and forth, the legs will need to be adjusted so unit is level. Yo...

F5 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E2/F5_E2_-_Front_Load_Washer
This error code indicates that the door is not locking properly. The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Is there ...

Error "Beeps" - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/Error_%22Beeps%22/Error_%22Beeps%22_-_Front_Load_Washer
Error "Beeps" are an audible signal that the machine makes to alert the user that something is not right. Typically this will happen if the washer door has not been opened and closed for at least 3 cy...

F8 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F8_E3_-_Front_Load_Washer
F8 E3 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Monitor the washer for one (1) minute to ensure the error code does not display again. If error co...

F0 E2 or Sd - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F0_E2_or_Sd_-_Front_Load_Washer
The F0 E2 or Sd error code means your washer has detected an excessive amount of suds in the washer basket. If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of rem...

How to Move - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/How_to_Move_-_Compact_Front_Load_Washer
Disconnect drain hose from drain system and from back of washer. Place inlet hose and drain hose inside washer drum. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ...

Not Draining - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Not_Draining/Not_Draining_-_Front_Load_Washer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Check that the top of the drain is at ...

Lint on Clothing - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Lint_on_Clothing/Lint_on_Clothing_-_Compact_Front_Load_Washer
Did you line dry the load of laundry? The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to tumble freely. A tight...

LF - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LF/LF_-_Error_Code_-_Top_Load_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either the F8E1 or the LF error codes may indicate t...

Winter Storage Care - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Winter_Storage_Care_-_Top_Load_Washer
To avoid damage, install and store washer where it will not freeze. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and re...

F9 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F9_E1_-_Front_Load_Washer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Care Experts please note that the Inst...

5. Cycle Modifiers - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/5.__Cycle_Modifiers_-_Front_Load_Washer
Once a wash setting is selected, it is saved for the cycle selected. To return to factory default cycle settings, unplug the washer for 30 seconds; then plug back in. Temp - The recommended wash tempe...

Not Draining - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Draining/Not_Draining_-_Top_Load_HE_Washer
Verify that the drain hose is not too far down into the standpipe beyond the elbow which could cause siphoning, water to drain back into the tub or slow or no spin. Using the U-shape drain hose form (...

LF - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LF/LF_-_Error_Code_-_Top_Load_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either the F8E1 or the LF error codes may indicate t...

Sounds: Beeping or Audio Noises on Front Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Sounds%3A_Beeping_or_Audio_Noises_on_Front_Load_Washers
Select models have a cycle signal option to turn off the end of cycle signal or tones that sound when a setting is touched. Use this option to turn on or off the signal that sounds at the end of the c...

Removing Odor or Smell - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Removing_Odor_or_Smell_-_Top_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine b...

VIDEO: How HE High Efficiency Washers Work
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_HE_High_Efficiency_Washers_Work
How HE High Efficiency Whirlpool Washers Work

Door will not unlock - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Door_Issues/Door_will_not_unlock_-_Front_Load_Washer
Was the washer just installed? In some circumstances, your new washer may arrive with the door locked. This can occur from the normal shipping movement. CLICK HERE for more information on how to unloc...

Winter Storage Care - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Winter_Storage_Care_-_Front_Load_Washer
To avoid damage, install and store washer where it will not freeze. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and re...

How to Move the All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/How_to_Move_the_All-In-One_Washer_Dryer
Disconnect drain hose from drain system and from back of washer/dryer. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground. To avoid structural damage to your was...

LED Display and Settings - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/LED_Display_and_Settings_-_Front_Load_Washer
Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cy...

VIDEO: F0 E5 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/VIDEO%3A_F0_E5_Error_Code_for_Top_Load_Washers
F0 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F0 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E2_Error_Code_for_Top_Load_Washers
F0 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E3_Error_Code_for_Top_Load_Washers
F5 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E2_Error_Code_for_Top_Load_Washers
F5 E2 Error Code for Whirlpool Top Load Washers

Rattling or Tapping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Rattling_or_Tapping_Noise_-_Front_Load_Washer
CLICK HERE to listen to a sound clip on the sound of the washer inlet hoses rattling/banging against the cabinet. Try to rock the washer diagonally, from corner to corner, with your hands; adjust the ...

VIDEO: F0 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washers
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E5 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E5_Error_Code_for_Top_Load_Washers
F2 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F3 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F3_E1_Error_Code_for_Top_Load_Washers
F3 E1 Error Code for Whirlpool Top Load Washers

Casual, Heavy Duty, or Deep Water Wash - Water Level - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Water_Level/Casual%2C_Heavy_Duty%2C_or_Deep_Water_Wash_-_Water_Level_-_Washer
The washer senses the size of the load and adds the correct amount of water for the load size. Opening the lid will put the washer into a pause, and you will have to press the start button to continue...

VIDEO: F3 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F3_E1_Error_Code_for_Top_Load_Washers
F3 E1 Error Code for Whirlpool Top Load Washers

Cleaning the Interior - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Interior_-_All-In-One_Washer_Dryer
The Clean Washer with affresh® message will flash at the end of a wash cycle when the washer has run 30 wash cycles. If the Clean Washer with affresh® cycle is not run, the message will stop flashing ...

LCD Display and Settings - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/LCD_Display_and_Settings_-_Front_Load_Washer
Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cy...

VIDEO: F2 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E3_Error_Code_for_Top_Load_Washers
F2 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E3_Error_Code_for_Top_Load_Washers
F6 E3 Error Code for Whirlpool Top Load Washers

lid - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/lid/lid_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is the lid open? Did the washer drain out? If lid (Lid opened) appears in display, the washer lid was left open. Close the lid to clear the display. If the lid is left open for more...

Lid Lock is Flashing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Flashing_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

VIDEO: F2 E4 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washers
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E2_Error_Code_for_Top_Load_Washers
F6 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washers
F1 E1 Error Code for Whirlpool Top Load Washers

Removing Odors or Smells - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Removing_Odors_or_Smells_-_Front_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine...

1h, 2h, 3h....up to 12h - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/1h%2C_2h%2C_3h....up_to_12h/1h%2C_2h%2C_3h....up_to_12h_-_Front_Load_Washer
When the display shows a number up to 12, followed by an "h", it means that the Delay Wash has been activated. Most front load washers can be set to delay the wash for up to 8 or 12 hours (depending o...

Wash Cycle Knob - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Wash_Cycle_Knob_-_Front_Load_Washer
NOTE: "CL" will display when the washer has run 30 wash cycles as a reminder to run the Clean Washer with affresh® cycle. Press the Wash Cycle Knob to activate the Extra Power option, which runs a col...

Not Starting or Not Operating - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Not_Operating/Not_Starting_or_Not_Operating_-_Front_Load_Washer
This is a reminder that you have set the control lock and need to de-activate it to allow the washer controls to function. It is possible for the washer to be unboxed and the door to be locked. The do...

1. Power - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/1._Power4.__LCD_Screen
How to Power ON the washer? Power Button - Press this button to turn the washer on and/or off What to Wash - Select the cycle Touch this button for three seconds to start the cycle, touch once to paus...

Power Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Power_Button/Power_Button_-_Front_Load_Washer
Touch to power up the washer. Touch again to turn the washer off.

Lid Lock is Solid Red - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Solid_Red_-_Top_Load_Washer
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

Tumble Fresh™ Option - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Other_Buttons_or_Icons/Options/Tumble_Fresh%E2%84%A2_Option_-_All-In-One_Washer_Dryer
The Tumble Fresh™ option will periodically tumble the load after the end of the wash cycle for up to 12 hours. Tumble Fresh™ may be ended at any time by touching the “X” on the touch screen to the rig...

LdU - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LdU/LdU_-_Error_Code_-_Top_Load_Washer
Possible Solutions Are there items on the lid? If LdU (Lid cannot unlock) appears in display, the washer detects that there are objects on washer lid preventing it from unlocking. Remove objects, such...

Clothing is Tangled - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Clothing_is_Tangled_-_Top_Load_Washer
The wash load must be sorted before starting the washer. Mix different sized items together (such as shirts and pants) for a more balanced load. This washer automatically selects the spin speed based ...

Cleaning the Interior - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Cleaning_the_Interior__-_Compact_Front_Load_Washer
CLICK HERE for more information on the importance of using HE detergent Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? Run the Clean Washer cycle every month to ...

Whirling or Spinning Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Whirling_or_Spinning_Noise_-_Front_Load_Washer
If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the basket which will result in noise and vibration. Try to rock the washer diagonally, from ...

Lid Lock is Solid Red - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Solid_Red_-_Top_Load_Washer
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

Door Will Not Lock or Unlock - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Door_Issues/Door_Will_Not_Lock_or_Unlock_-_Front_Load_Washer
CLICK HERE for more information on how to unlock your washer door when locked at the time of installation When using one of these cycles, the door will remain locked until the cancel button is pushed....

OL - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/OL/OL_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is the Washer overloaded? If OL (overloaded) appears in display, the load too large. If an overload is detected, the washer will drain any water and detergent in the washer. Remove ...

VIDEO: F9 E1 or DRN Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F9_E1_or_DRN_Error_Code_for_Top_Load_Washers
F9 E1 or DRN Error Code for Whirlpool Top Load Washers

Removing Odors and Smells - All in One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Odor_or_Smell/Removing_Odors_and_Smells_-_All_in_One_Washer_Dryer
The Clean Washer with affresh® message will flash at the end of a wash cycle when the washer has run 30 wash cycles. If the Clean Washer with affresh® cycle is not run, the message will stop flashing ...

VIDEO: F8 E1 or LF Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F8_E1_or_LF_Error_Code_for_Top_Load_Washers
F8 E1 or LF Error Code for Whirlpool Top Load Washers

Cleaning the Exterior - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_and_Maintenance/Cleaning_the_Exterior_-_Top_Load_Washer
Possible Solutions Cleaning the outside of the washer: Use a soft, damp cloth or sponge to wipe away any spills. Use only mild soaps or cleaners when cleaning external washer surfaces. IMPORTANT: To a...

F8 E1 or Lo FL - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F8_E1_or_Lo_FL_-_Front_Load_Washer
If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive. Press the power button, and the washer will start a drain routine, which takes approximate...

Not Cleaning - Knob Controls - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Not_Cleaning_Clothing/Not_Cleaning_-_Knob_Controls_-_Top_Load_Washer
The dispenser will flush about 10 seconds to mix with water at the right time in the cycle. If you feel that the clothes are not coming clean or that the washer level is lower than when you first star...

LoC or LC - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/LoC_or_LC/LoC_or_LC_-_Front_Load_Washer
If you try to push buttons, you may see the code "LoC" or "LC" (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls...

Cleaning the Exterior - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Cleaning_the_Exterior_-_Front_Load_Washer
Possible Solutions Cleaning the outside of the washer: Use a soft, damp cloth or sponge to wipe away any spills. Use only mild soaps or cleaners when cleaning external washer surfaces. IMPORTANT: To a...

OFb or ofb - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/OFb_or_ofb/OFb_or_ofb_-_Error_Code_-_Top_Load_Washer
If OFb (off balance load) appears in display, the load is out of balance. The washer was unable to remedy the off balance load via automated methods and now needs manual intervention to redistribute t...

Knocking or Thumping Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Knocking_or_Thumping_Noise_-_Top_Load_Washer
Typically, a knocking or thumping noise will only occur during agitation/wash, and spin portions of the cycle. If a drain pan is used under the washer, the leveling legs may need to be adjusted out to...

Long Dry Times - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dry_Function_Option/Long_Dry_Times_-_Front_Load_Washer
Long Dry Times are Normal The heating element inside the washer is not as large as the one in your dryer. This is not meant to dry a large load of clothing, like jeans or towels. Your load could be to...

Not Starting or Operating - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Operation/Not_Starting_or_Operating/Not_Starting_or_Operating_-_Compact_Front_Load_Washer
It is possible for the washer to be unboxed and the door to be locked. In order for the washer to operate, connect to the cold water supply and connect the power. Did you try to start the washer befor...

Using Powder, Liquid, or Single Dose Pod Detergent
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Tips_and_Tricks/Using_Powder%2C_Liquid%2C_or_Single_Dose_Pod_Detergent
Using Powder, Liquid, or Pod Detergent in your Whirlpool Washer You may want to know which is better to use - liquid detergent, powdered detergent or Pods? They are also more effective in tying up ele...

Vibration - Washing a Single Items - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Vibration/Vibration_-_Washing_a_Single_Items_-_Top_Load_Washer
The washer must be level and all four washer feet must be in firm contact with the floor. If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the...

No Power - Not Turning On - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Not_Operating/No_Power_-_Not_Turning_On_-_Front_Load_Washer
Is the washer connected correctly to the power source? If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code "LoC" or "LC" (depending ...

Winter Storage Care - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Winter_Storage_Care__-_Compact_Front_Load_Washer
Because some water may stay in the hoses, freezing can damage the washer. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze ...

Not Draining - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Not_Draining/Not_Draining_-_All-In-One_Washer_Dryer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Is the Drain hose taped onto the drain...

Using Powder, Liquid, or Single Dose Pod Detergent
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Using_Powder%2C_Liquid%2C_or_Single_Dose_Pod_Detergent
Using Powder, Liquid, or Pod Detergent in your Whirlpool Washer You may want to know which is better to use - liquid detergent, powdered detergent or Pods? They are also more effective in tying up ele...

Humming Noise - All in One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Vibration_and_Sounds/Humming_Noise_-_All_in_One_Washer_Dryer
Possible Solutions Humming There are several times during the wash cycle where you may hear a humming noise. These are all normal operational sounds: As the washer/dryer fills with water, you may hear...

Clothes are Wrinkled - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dry_Function_Option/Clothes_are_Wrinkled_-_Front_Load_Washer
Possible Solutions Dried Loads are wrinkled Your clothing items may not have been removed from the washer at the end of the dry cycle. Remove your garments promptly at the end of the drying cycle, or ...

The washer (or dryer) isn’t online at this time
https://producthelp.whirlpool.com/Connected_Appliances/Other_Info/Help_with_Alexa/Alexa_Error_Messages/The_washer_(or_dryer)_isn%E2%80%99t_online_at_this_time
The washer (or dryer) isn’t online at this time Alexa is saying “The washer (or dryer) isn’t online at this time ” Please check your smart appliance’s Wi-Fi connection. Double check that the appliance...

No Power - Not Operating - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/No_Power_-_Not_Operating_-_Top_Load_Washer
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Gr...

Winter Storage Care - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Winter_Storage_Care_-_All-In-One_Washer_Dryer
NOTE: If you will not be using your Load & Go™ Bulk Dispenser for an extended period of time, completely clean out the unit and dispose of all detergent and fabric softener. HELPFUL TIP: Attach a remi...

No Power - Not Operating - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating/No_Power_-_Not_Operating_-_Top_Load_Washer
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Gr...

F8E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F8E1_-_Error_Code_-_All-In-One_Washer_Dryer
The F8E1 Error Code indicates that the washer/dryer is not detecting any water flow going to the washer/dryer. Washer/dryer may not be connected to the home water supply. Home water supply valve may n...

F5 E4 or dr - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F5_E4_or_dr_-_Front_Load_Washer
F5 E4 or dr Error Code The F5 E4 or dr Error Code indicates that the washer has run for 3 consecutive cycles without the door being opened. To remove the code, open and close the door and restart the ...

-:-- (dashes in the display) - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/-%3A--_(dashes_in_the_display)_-_Front_Load_Washer
Possible Solutions Are any of the cycles working? If any cycle is working, try resetting the controls: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turnin...

Removing Odors and Smells - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Removing_Odors_and_Smells_-_Compact_Front_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine b...

F0E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E1_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Clothing in machine for Clean Washer The F0E1 Error Code indicates that you are trying to run a "Clean Washer" cycle and the washer is detecting there are items still in the washer/...

Control Panel Symbols and Usage - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Control_Panel_Symbols_and_Usage/Control_Panel_Symbols_and_Usage_-_Compact_Front_Load_Washer
When you touch the Start/Pause button to start the program/cycle, the drum will rotate to detect the load size of the laundry. Turn the knob to the number of hours you want to delay the start of the w...

F0E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E1_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Clothing in machine for Clean Washer The F0E1 Error Code indicates that you are trying to run a "Clean Washer" cycle and the washer is detecting there are items still in the washer/...

Washer Won't Turn On - No Operation - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Washer_Won't_Turn_On_-_No_Operation_-_Top_Load
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If the washer is on a fuse box, check ...

Vibration, Walking or Off Balance - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Vibration%2C_Walking_or_Off_Balance_-_Front_Load_Washer
If your washer has a vibration, seems to "walk" across the floor, has a thumping or banging noise, or seems off-balance, there may be an issue with the installation, or with the items you are washing....

LoC or LC - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/LoC_or_LC_-_Front_Load_Washer
This error code does not mean "Door Locked". The door will open when the control is locked, but the washer will not start due to control being locked. For each second CONTROL LOCK is held down, the di...

Detergent Concentration for Bulk Dispensers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Detergent_Concentration_for_Bulk_Dispensers
This allows the consumer to fill the dispenser in advance, and it will automatically dispense the correct amount of detergent based on the load selected and the water hardness selected. If so, simply ...

Low Water Level - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Low_Water_Level/Low_Water_Level_-_Compact_Front_Load_Washer
Does the water level seem too low? The water level on this washer should seem low because this is a low water usage washer. The water level will not be as visible as it was in your standard, deep fill...

F8 E1 or LO FL - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F8_E1_or_LO_FL/F8_E1_or_LO_FL_-_Front_Load_Washer
If the washer has an F8 E1 error or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximat...

Dispenser Cleaning - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Dispenser_Cleaning_-_Compact_Front_Load_Washer
Cleaning the Dispensers: After a period of using your washer, you may find some residue buildup in the washer’s dispensers. To remove residue from the dispensers, remove the drawer and wipe the surfac...

No Power Not Turning On - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Operation/Not_Starting_or_Operating/No_Power_Not_Turning_On_-_Compact_Front_Load_Washer
This solution means the washer has no power, lights, or water turning on. If that is correct, continue reading the below information. If the washer is operating at all, please select "yes" from the ab...

Not Spinning or Wet Clothes at the End of the Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Spinning_or_Wet_Clothes_at_the_End_of_the_Cycle_-_Top_Load_Washer
If the power failed during the spin cycle, it's possible that the washer did not ramp up to full spin speed. Pausing the machine later in the cycle could cause limitations on the washer running at max...

Low Water Level - Knob Control - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Low_Water_Level/Low_Water_Level_-_Knob_Control_-_Top_Load_Washer
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

Not Spinning or Wet Clothes at the End of the Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Spinning_or_Wet_Clothes_at_the_End_of_the_Cycle_-_Top_Load_Washer
If the power failed during the spin cycle, it's possible that the washer did not ramp up to full spin speed. Pausing the machine later in the cycle could cause limitations on the washer running at max...

Wrinkle Shield™ - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Home_Button/Options/Wrinkle_Shield%E2%84%A2_-_Front_Load_Washer
The Wrinkle Shield™ option is only available when a drying mode is selected, and will periodically tumble the load after the end of the cycle for up to 12 hours. Wrinkle Shield™ may be ended at any ti...

F0 E5 or ob - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F0_E5_or_ob_-_Front_Load_Washer
This is likely because a sizeable unbalanced load could result in reduced spin speeds, which removes less water from the clothing during the spin cycles. If the load is not dripping wet, then the cycl...

Wrinkle Shield™ - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Home_Button/Options/Wrinkle_Shield%E2%84%A2_-_Front_Load_Washer
The Wrinkle Shield™ option is only available when a drying mode is selected, and will periodically tumble the load after the end of the cycle for up to 12 hours. Wrinkle Shield™ may be ended at any ti...

Squeaking or Squealing Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Squeaking_or_Squealing_Noise_-_Top_Load_Washer
When the washer is overloaded, the balance system may be under pressure. This could cause different type noises such as squeaks or squeals. Items left in pockets could get in the pump/motor Small item...

Not Draining - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Not_Draining/Not_Draining_-_Compact_Front_Load_Washer
The drain hose should not extend more than 4.5" (113 mm) into the drainpipe. The drain hose may be too far down inside the drainpipe (standpipe) or laundry tub. Using the U-shape drain hose form (as d...

Cleaning the Door Seal - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Cleaning_the_Door_Seal_-_Front_Load_Washer
Inspect the seal between the door opening and the drum for stained areas or soil buildup. Gently pull back the seal to inspect all areas under the seal and to check for foreign objects. If stained are...

Vibration or Out of Balance loads - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Vibration/Vibration_or_Out_of_Balance_loads_-_Top_Load_Washer
Are your clothes still wet or did the washer not complete the cycle (long cycle time)? It will try to correct an out of balance situation by adding water and trying to redistribute the clothing. If th...

drn - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/drn/drn_-_Error_Code_-_Top_Load_Washer
If F9 E1 (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. Also make sure that the drain hose end is higher than 36 inches from the floor. If n...

Sounds: Spraying, Splashing, or Sloshing noise
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Sounds%3A_Spraying%2C_Splashing%2C_or_Sloshing_noise
Normal Sounds: Spraying, Splashing, or Sloshing on your Whirlpool Top Load Washer The washer will make a spraying sound as water fills the basket. As the clothes and water move in the basket, there wi...

Door will not Unlock - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Door_Concerns/Door_will_not_Unlock__-_Compact_Front_Load_Washer
The washer door will unlock at the end of the drain. Touch the START/PAUSE button to exit the error code, then wait for the door to unlock. If the water temperature is hotter than 104° F (40° C), the ...

Drying Function - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Home_Button/Drying_Function_-_All-In-One_Washer_Dryer
You can then select if you want to use Auto Drying, Timed Drying, or if you want to use the Drying only mode. To use the Drying Only cycle, follow the drying instructions above by selecting either Aut...

FC E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/FC_E1_-_Front_Load_Washer
Possible Solutions FC E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F6 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F6_E1_-_Front_Load_Washer
Possible Solutions F6 E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F7 EA - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_EA_-_Front_Load_Washer
Possible Solutions F7 EA Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F6 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F6_E3_-_Front_Load_Washer
Possible Solutions F6 E3 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F5 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F5_E3_-_Front_Load_Washer
Possible Solutions F5 E3 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F0E2 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E2_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Excess Suds The F0E2 Error Code indicates that there are excessive suds detected inside the washer/dryer. The washer/dryer is running a suds reduction routine in order to reduce the...

A09 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/A09_-_Error_Code_-_Compact_Front_Load_Washer
Have you checked your water supply? “A09” on display (Water Inlet Problem—no water or insufficient water supply) If this error occurs, the system will pause. Unplug washer or disconnect power. Are wat...

Clothing has White Residue
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Clothing_has_White_Residue
There are a few potential causes of what is commonly referred to as "white residue". White residue can be caused by one or a combination of the following: If your washer water is too cold, it may not ...

F6 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F6_E2_-_Front_Load_Washer
Possible Solutions F6 E2 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

FC E0 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/FC_E0_-_Front_Load_Washer
Possible Solutions FC E0 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F3E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F3E1_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Water Pressure Issue The F3E1 Error Code indicates that there may be a problem with the Water Pressure sensor. Verify that your water supply has the adequate amount of pressure goin...

Exterior Cleaning - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Exterior_Cleaning_-_Compact_Front_Load_Washer
Possible Solutions Cleaning the outside of the washer: Use an affresh ® Machine Cleaning Wipe or a soft, damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to hel...

F8 E1 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F8_E1_Error_code_for_top_load_washers
If the washer has an F8 E1 error or LO FL error, the lid will be locked, and the control will be unresponsive. Any of these drain hose issues can cause the washer to siphon (fills and drains at the sa...

F0E5 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E5_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Off Balance Load The F0E5 Error code indicates that an off balance load has been detected. This means that the load in the washer/dryer could be too large, or it could be unbalanced...

Wet Clothes at the End of Cycle - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Spinning_or_Wet_Clothes/Wet_Clothes_at_the_End_of_Cycle_-_Top_Load_HE_Washer
When washing these types of clothing items (including heavy coats or blankets), do not use the Normal cycle or a Rapid Wash cycle (on some models). If the power failed during the spin cycle, it's poss...

Gurgling or Slurping Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Gurgling_or_Slurping_Noise_-_Top_Load_Washer
Possible Solutions Gurgling or Slurping Noises: Typically, a gurgling or slurping noise will only occur during the drain portion of the cycle. During draining, the washer pump will continuously run to...

White Residue on Clothing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/White_Residue_on_Clothing_-_Top_Load_Washer
The interaction of some body soils with detergent can result in the formation of a residue that is distinct from lint but may appear similar to undissolved detergent. This type of residue has a tenden...

Exterior the Cleaning - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Exterior_the_Cleaning_-_All-In-One_Washer_Dryer
Possible Solutions Cleaning the outside of the washer: Use an affresh ® Machine Cleaning Wipe or a soft, damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to hel...

Remote Enable Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Remote_Enable_Button/Remote_Enable_Button_-_Front_Load_Washer
Download the Whirlpool™ app and follow the instructions to connect your washer to your home Wi-Fi network. After connecting to WiFi, touch the REMOTE ENABLE button any time you want to use the app. To...

F24 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/F24_-_Error_Code_-_Compact_Front_Load_Washer
If so, select and start the Rinse & Spin program to complete the interrupted wash program/cycle. Follow the maximum load size indicated in the “Program/ Cycle Guide" in your Owner's Manual. Touch and ...

F3 E6 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F3_E6_-_Front_Load_Washer
Possible Solutions F3 E6 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F3 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F3_E2_-_Front_Load_Washer
Possible Solutions F3 E2 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F7 E9 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_E9_-_Front_Load_Washer
Possible Solutions F7 E9 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F7 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_E2_-_Front_Load_Washer
Possible Solutions F7 E2 Error Code Power unit down by turning off the circuit breaker or unplugging for five (5) minutes. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer ...

F4 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F4_E1_-_Front_Load_Washer
Possible Solutions F4 E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

Power Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Power_Button/Power_Button_-_Front_Load_Washer
Select to turn the washer on and off. Select to stop or cancel a cycle at any time.

Remote Enable Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Remote_Enable_Button/Remote_Enable_Button_-_Front_Load_Washer
Download the Whirlpool™ app and follow the instructions to connect your washer to your home Wi-Fi network. After connecting to WiFi, touch the REMOTE ENABLE button any time you want to use the app. To...

Beeping or Audio Tones - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Beeping_or_Audio_Tones_-_Top_Load_Washer
Use the "End Beep" button on the control to make changes to the tones as described below: Use this to turn the signal indicating the end of the wash cycle to low, medium, high or off. NOTE: You may al...

Remote Enable Button - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Remote_Enable_Button/Remote_Enable_Button_-_All-In-One_Washer_Dryer
Remote Enable Button Touch this button to be able to use the Whirlpool™ app to control the washer/dryer. Download the Whirlpool™ app and follow the instructions to connect your washer/dryer to your ho...

The washer (or dryer) isn’t set to remote control
https://producthelp.whirlpool.com/Connected_Appliances/Other_Info/Help_with_Alexa/Alexa_Error_Messages/The_washer_(or_dryer)_isn%E2%80%99t_set_to_remote_control
The washer (or dryer) isn’t set to remote control Alexa is saying “The washer (or dryer) isn’t set to remote control” What do I do? Please ensure your smart appliance is set to remote enable mode. See...

F0 E5 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F0_E5_Error_code_for_top_load_washers
If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE. You may notice the load is extremely wet, which this may have been the cause. Adding we...

F5 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F5_E1_-_Front_Load_Washer
Possible Solutions F5 E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F7 E8 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_E8_-_Front_Load_Washer
Possible Solutions F7 E8 Error Code Power unit down by turning off the circuit breaker or unplugging for five (5) minutes. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer ...

F3 E5 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F3_E5_-_Front_Load_Washer
Possible Solutions F3 E5 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F1 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F1_E1_-_Front_Load_Washer
Possible Solutions F1 E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F8 E6 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F8_E6_Error_code_for_top_load_washers
Possible Solutions Did you receive a F8 E6 washer lid open alert? A F8 E6 alert indicates the washer lid was left open. Close the lid to clear the display. Depending on your model, you may have to tou...

Error Code F8E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Not_Filling_or_Takes_too_long_to_fill/Received_an_Error_Code_F8E1/Error_Code_F8E1_-_Front_Load_Washer
Both the hot and the cold water faucets or valves must be turned on and fully open. Check the household faucets to see if the hot and cold water faucets are turned on. Using anti-flood devices can red...

F4 E4 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F4_E4_-_Front_Load_Washer
Possible Solutions F4 E4 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F1 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F1_E2_-_Front_Load_Washer
Possible Solutions F1 E2 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer fo...

F5 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F5_E2_-_Front_Load_Washer
F5 E2 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Open and close the door. Restart a new cycle. Monitor the was...

Not Cleaning Clothes - Electronic Touch Control - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Not_Cleaning_Clothing/Not_Cleaning_Clothes_-_Electronic_Touch_Control_-_Top_Load_Washer
The dispenser will flush about 10 seconds to mix with water at the right time in the cycle. If you feel that the clothes are not coming clean or that the washer level is lower than when you first star...

Low Water Level - Electronic Touch Control - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Low_Water_Level/Low_Water_Level_-_Electronic_Touch_Control_-_Top_Load_Washer
As the washer dampens and moves the load, the level of the items will settle in the basket. If there is too much water, the clothes will float and the cleaning action will be lessened due to the desig...

How to Remove the Shipping Strap
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Installation_Support/How_to_Remove_the_Shipping_Strap
If it is not removed, and the washer is started, the tub is unable to move, and will cause vibration and noise in your Stacked Laundry Center. See pictures of the back of the washer with shipping stra...

2018 or Before - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2018_or_Before/2018_or_Before_-_Front_Load_Washer
2018 or Before Center Knob Unit purchased before 2019: If your washer has one of these or similar control, please see your Owner's Manual for more information on using the control. If you would like t...

A10 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/A10_-_Error_Code_-_Compact_Front_Load_Washer
Possible Solutions Did the washer drain? “A10” on display (Drain Problem) Unplug washer or disconnect power. Check the following: Is the drain hose kinked? Is the drain hose frozen? Is the drain hose ...

F0 E2 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F0_E2_Error_code_for_top_load_washers
Did you receive a F0 E2 oversuds alert? This alert indicates you may have excessive suds in washer. The washer is running a suds reduction routine. Always measure detergent, and base detergent quantit...

F3 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F3_E1_-_Front_Load_Washer
F3 E1 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Monitor the washer for one (1) minute to ensure the error cod...

Door Will Not Lock - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Door_Issues/Door_Will_Not_Lock_-_Front_Load_Washer
Possible Solutions Was the cycle just started? The door will not lock for approximately 10 seconds after starting a cycle. This is normal. Does the lock need to be cleaned? Verify that there is nothin...

Dryer Not Heating - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Dryer_Cycle_Questions_or_Concerns/Dryer_Not_Heating_-_All-In-One_Washer_Dryer
The All-in-One Washer and Dryer requires 240-volt power supply from your wall outlet. If you do not have 240-volt, your washer/dryer will not operate correctly. If you do not have this type of wall pl...

F6E2 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F6E2_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Communication Failure The F6E2 Error Code indicates that there may be a communication failure between the electronics in the washer/dryer. Try resetting the washer/dryer by unpluggi...

Not Filling or Filling Slowly - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Not_Filling_or_Takes_too_long_to_fill/Not_Filling_or_Filling_Slowly/Not_Filling_or_Filling_Slowly_-_Front_Load_Washer
Both the hot and the cold water faucets or valves must be turned on and fully open. Check the household faucets to see if the hot and cold water faucets are turned on. Using anti-flood devices can red...

F6E1- Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F6E1-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Communication Failure The F6E1 Error Code indicates that there may be a communication failure between the electronics in the washer/dryer. Try resetting the washer/dryer by unpluggi...

Utility Cycles - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Utility_Cycles/Utility_Cycles_-_Front_Load_Washer
Possible Solutions Press this icon to access the following utility cycles: Drain & Spin Clean Washer with affresh® cycle Touch the utility cycle you wish to use and follow the screen prompts. See the ...

Sound Volume - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Preferences/Sound_Volume_-_Front_Load_Washer
Select the Sound Volume to do the following: Adjust the loudness or softness of the audio tones Adjusts the loudness or softness of the tones when you have them unmuted Does not mute or unmute the ton...

F0E4 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E4_-_Error_Code_-_All-In-One_Washer_Dryer
Over Temp on Wash cycle An F0E4 Error Code indicates that the wash water temperature is too hot. The washer/dryer may be connected incorrectly to the home water supply. The washer/dryer must be connec...

Unlocking the Door Manually - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Door_Questions_or_Concerns/Unlocking_the_Door_Manually_-_All-In-One_Washer_Dryer
Wait until the drum has stopped rotating – never open the door while the drum is in motion. Open the drain pump filter access door at the bottom right corner at the front of the washer/dryer. With a P...

Not Filling or Filling Slowly - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Not_Filling_or_Takes_too_long_to_fill/Not_Filling_or_Filling_Slowly_-_All-In-One_Washer_Dryer
Check the household faucet to see if the cold water faucet is turned on. If the inlet hose is kinked, it will get no water at all because there is only one inlet hose on this washer. There is an inlet...

Not Starting - Has Power - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Not_Starting_or_Not_Operating/Not_Starting_-_Has_Power_-_Stacked_Laundry_Center
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

F5E4 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F5E4_-_Error_Code_-_All-In-One_Washer_Dryer
Door not Opened between Cycles The F5E4 Error Code indicates that the washer/dryer door has not been opened between cycles. Three consecutive cycles were run without the door being opened. The washer/...

F0E3 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F0E3_-_Error_Code_-_All-In-One_Washer_Dryer
The F0E3 error code indicates that the temperatures in the washer/dryer are too hot during the dry cycle. Verify that you are using the right cycle for the fabrics being laundered. Try resetting the w...

Door Locked at the End of Wash Cycle - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Door_Concerns/Door_Locked_at_the_End_of_Wash_Cycle_-_Compact_Front_Load_Washer
Door is Locked at the End of the Wash Cycle There are several reasons the door may still be locked after the wash cycle is complete: The washer door will unlock at the end of the drain. While the Tumb...

Not Filling or Filling Slowly - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Not_Filling/Not_Filling_or_Filling_Slowly_-_Compact_Front_Load_Washer
Check the household faucet to see if the cold water faucet is turned on. If the inlet hose is kinked, it will get no water at all because there is only one inlet hose on this washer. There is an inlet...

PF - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/PF/PF_-_Error_Code_-_Top_Load_Washer
Possible Solutions Has the wash cycle been interrupted by a power failure? A PF (Power Failure) error code indicates that the wash cycle was interrupted by a power failure. Touch and hold START to res...

Cleaning the Door Seal - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Door_Seal_-_All-In-One_Washer_Dryer
Cleaning the Door Seal Open the washer/dryer door and remove any clothing or items from the washer/dryer. Inspect the seal between the door opening and the drum for stained areas or soil buildup. Gent...

Sound Volume - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Preferences/Sound_Volume_-_Front_Load_Washer
Select the Sound Volume to do the following: Adjust the loudness or softness of the audio tones Adjusts the loudness or softness of the tones when you have them unmuted Does not mute or unmute the ton...

Continuously Fills / Fills and Drains - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Not_Filling_or_Takes_too_long_to_fill/Continuously_Fills_%2F%2F_Fills_and_Drains/Continuously_Fills_%2F%2F_Fills_and_Drains_-_Front_Load_Washer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Check that the top of the drain is at ...

Gurgling, Slurping or Humming Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Gurgling%2C_Slurping_or_Humming_Noise_-_Front_Load_Washer
During drain, the washer pump will continuously run to remove the water released from the load. Due to this continuous running, the pump will remove most of the water and then pump air. Verify that bo...

Gurgling, Slurping or Humming Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Gurgling%2C_Slurping_or_Humming_Noise_-_Front_Load_Washer
During drain, the washer pump will continuously run to remove the water released from the load. Due to this continuous running, the pump will remove most of the water and then pump air. Verify that bo...

F9 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F9_E1/F9_E1_-_Front_Load_Washer
F9 E1 Code in the display: This error code indicates that drain times are longer than expected, typically over eight (8) minutes. Make sure the drain hose is not kinked or clogged. Use the U-shaped dr...

Water Level Using Bulky Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Water_Level/Water_Level_Using_Bulky_Cycle_-_Top_Load_Washer
It may appear that there is not enough water to wash a bulky load, but the washer will continue to add water while its sensors monitor the load. The Bulky Cycle is recommended for a lot of different t...

Faucet Questions - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Faucet_Concerns/Faucet_Questions_-_Top_Load_Washer
For models with interior faucet The water faucet dispenses fresh water that can be used for pretreating clothes, rinsing your detergent cup, or filling your washer tub. The faucet dispenses cold water...

2. What to Wash/How to Wash - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/2._What_to_Wash%2F%2FHow_to_Wash_-_Front_Load_Washer
What to Wash/How to Wash First, determine what items are in the load that you are trying to wash. Use that to guide your “What to Wash” selection. Then determine how you want the washer to wash them a...

Err - Error Code - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/Err_-_Error_Code_-_Front_Load_Washer
Possible Solution Err - Error Message The "Err" message will appear under the following situations: You attempt to change or modify the cycle while the washer is running. You try to start a cycle whil...

Using the Load and Go Cartridge - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dispenser_Info/Dispenser_Questions/Using_the_Load_and_Go_Cartridge_-_Front_Load_Washer
Using the Load & Go™ Cartridge (some models) The dispenser cartridge will hold about 18.5 oz. (550 ml) of HE liquid detergent, or enough for up to 36 loads. To Fill: Push back on the tab and lift the ...

Removing from Store Demo Mode
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Tips_and_Tricks/Removing_from_Store_Demo_Mode
Store Demo Mode for the Whirlpool All-in-One Washer and Dryer All-in-One Washer and Dryer has Store Demo Mode so unit can simulate operation in a retail store (without water). Removing the All-in-One ...

dLO - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/dLO_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is your Washer lid locking? If dL (lid lock will not lock or lid lock failure) appears in display, it means the lid is not locking. It's possible that an item in the load may be kee...

Removing from Store Demo Mode
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Tips_and_Tricks/Removing_from_Store_Demo_Mode
Store Demo Mode for the Whirlpool All-in-One Washer and Dryer All-in-One Washer and Dryer has Store Demo Mode so unit can simulate operation in a retail store (without water). Removing the All-in-One ...

Cleaning the Load & Go™ Bulk Dispenser
https://producthelp.whirlpool.com/?title=Laundry/All-In-One_Washer_Dryer/Product_Info/Cleaning_and_Care/Cleaning_the_Load_%26_Go%E2%84%A2_Bulk_Dispenser
To remove residue from the dispensers, lift the handle on the dispenser container housing to remove it from the washer/dryer cabinet, then rinse the two dispensers thoroughly with running water. If re...

Lint on Clothes - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dry_Function_Option/Lint_on_Clothes_-_Front_Load_Washer
If you are using the wash and dry feature, you may notice more lint than you normally experience with your old washer. The area under door seal may be clogged with lint. Gently pull back the rubber do...

Sounds: Clunk or Clunking Noise During Spin
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Sounds%3A_Clunk_or_Clunking_Noise_During_Spin
Do you hear a Clunking Noise on your Whirlpool Top Load Washer? Clunk/Clunking Noises: There will be a clunk noise as the drive system shifts from agitation mode to spin mode or vise versa. These soun...

F9E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F9E1_-_Error_Code_-_All-In-One_Washer_Dryer
The F9E1 Error Code indicates that the washer/dryer is not draining in a timely manner, or at all. Drain Pump on the Washer/dryer may need to be cleaned. Clean the drain pump filter and the bellows dr...

LdL - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LdL/LdL_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is your washer lid locking? If LdL (lid lock will not lock or lid lock failure) appears in display, it means the lid is not locking. It's possible that an item in the load may be ke...

Dry Cycle Will Not Run - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Dryer_Cycle_Questions_or_Concerns/Dry_Cycle_Will_Not_Run_-_All-In-One_Washer_Dryer
Check the following if the drying cycle will not run: There may be two household fuses or circuit breakers for the washer/dryer. Check that both fuses are intact and tight, or that both circuit breake...

Display of Time Remaining Seems Long
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Display_of_Time_Remaining_Seems_Long
The time displayed during a cycle is an estimate of the time to complete the load. During conditions of excessive suds or unbalanced load, the estimated time remaining on your washer may differ from t...

F6 E2 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F6_E2_Error_code_for_top_load_washers
Possible Solutions Did you receive a F6 E2 washer reboot alert? The F6 E2 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait f...

Cleaning the Door Seal
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Cleaning_and_Care/Cleaning_the_Door_Seal
Cleaning the Door Seal on your Whirlpool All-in-One Washer and Dryer Open the washer/dryer door and remove any clothing or items from the washer/dryer. Inspect the seal between the door opening and th...

F6 E3 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F6_E3_Error_code_for_top_load_washers
Possible Solutions Did you receive a F6 E3 washer reboot alert? The F6 E3 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait f...

F0 E3 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F0_E3_Error_code_for_top_load_washers
Possible Solutions Did you receive a F0 E3 oversized load alert? If F0 E3 appears, the load is too large. If an overload is detected, the washer will drain any water and detergent in the washer. Remov...

F3 E1 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F3_E1_Error_code_for_top_load_washers
Possible Solutions Did you receive a F3 E1 water level alert? The F3 E1 alert indicates the washer can't detect the water level. There may be an issue with the appliance control unit or associated wir...

Clunk or Clunking Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Clunk_or_Clunking_Noise_-_Top_Load_Washer
Possible Solutions Clunk or Clunking Noises: There will be a clunk noise as the drive system shifts from agitation mode to spin mode or vise versa. These sounds are part of the normal washer operation...

Getting Cold Water when Warm or Hot was Selected
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Getting_Cold_Water_when_Warm_or_Hot_was_Selected
The washer senses the temperature at the bottom in the tub and not at the incoming valve where the water enters the appliance. The tap water may be warmer than normal and so if you request a warm wash...

Start/Pause Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Start%2F%2FPause_Button/Start%2F%2FPause_Button_-_Front_Load_Washer
Start/Pause Button Touch and hold to start, or touch to pause a cycle. When you start a cycle, the door will lock, the washer will sense the load size, and the wash cycle will begin.

Symptom Not Listed - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Symptom_Not_Listed/Symptom_Not_Listed_-_Front_Load_Washer
The symptom your product is experiencing is not listed in this guide. If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page. What sp...

Wrinkle Shield™ Option - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Other_Buttons_or_Icons/Options/Wrinkle_Shield%E2%84%A2_Option_-_All-In-One_Washer_Dryer
The Wrinkle Shield™ option is only available when a drying mode is selected, and will periodically tumble the load after the end of the cycle for up to 12 hours. Wrinkle Shield™ may be ended at any ti...

Using the Load & Go Detergent Dispenser
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Product_Assistance/Using_the_Load_%26_Go_Detergent_Dispenser
Using the Load & Go™ detergent dispenser and the single-dose detergent dispenser at the same time will result in oversudsing. If the Load & Go™ dispenser runs out of liquid HE detergent, and the Load ...

Software Terms and Conditions - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Info/Software_Terms_and_Conditions_-_Front_Load_Washer
Possible Solutions Press this option to read the terms and conditions of the software used within this washer. Follow the prompts as necessary.

Load & Go™ Dispenser 1 - All-In-One Washer Dryer
https://producthelp.whirlpool.com/?title=Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Load_%26_Go_Dispenser/Load_%26_Go%E2%84%A2_Dispenser_1_-_All-In-One_Washer_Dryer
Possible Solutions Load & Go™ Dispenser 1 Press this icon to access: Load & Go™ Status Dispenser 1 and choose between: Active Disabled (1 Cycle) Off (Permanently) Detergent Concentration Dispenser 1 a...

Dryer Not Drying or Long Dry Times- All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Dryer_Cycle_Questions_or_Concerns/Dryer_Not_Drying_or_Long_Dry_Times-_All-In-One_Washer_Dryer
If using the unit for both washing and drying, load the drum to half the drum or less Instead of venting like a traditional dryer, the air is looped through a water cooled condenser where the moisture...

Presoaking without running a wash cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Faucet_Concerns/Presoaking_without_running_a_wash_cycle__-_Top_Load_Washer
If you choose to drain water in the tub: with the washer turned on, select DRAIN & SPIN and touch and hold the START/PAUSE button. If you choose to rinse the laundry: with the washer turned on, select...

Gurgling or Water Sloshing Sound - All in One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Vibration_and_Sounds/Gurgling_or_Water_Sloshing_Sound_-_All_in_One_Washer_Dryer
Possible Solutions Gurgling or Water Sloshing Sounds Gurgling, water sloshing or water surging noises are all normal at certain stages of the wash cycle. As water enters the washer/dryer, you may hear...

Not Cleaning Clothing - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Not_Cleaning_Clothing_-_Top_Load
The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. You can also use the Casual or D...

Software Terms and Conditions - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Info/Software_Terms_and_Conditions_-_Front_Load_Washer
Possible Solutions Press this option to read the terms and conditions of the software used within this washer. Follow the prompts as necessary.

LED Control in Door - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Overview_of_Control/LED_Control_in_Door_-_Front_Load_Washer
The control for this Washer operates very similarly to your cell phone. Once a cycle or option has been selected, you may have to scroll up or down to see the available selections. If the screen appea...

Water Remains in Door Seal (Bellows) - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Water_Remains_After_Cycle_is_Complete/Water_Remains_in_Door_Seal_(Bellows)_-_Front_Load_Washer
If you have water remaining in the door seal (bellows) area of the washer, check under the door seal. Small items, dirt, and pet hair can get trapped in the bellows area. If there is a build-up, water...

LCD Control in Door - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Overview_of_Control/LCD_Control_in_Door_-_Front_Load_Washer
The control for this Washer operates very similarly to your cell phone. Once a cycle or option has been selected, you may have to scroll up or down to see the available selections. If the screen appea...

Cleaning the Load & Go™ Bulk Dispenser - All-In-One Washer Dryer
https://producthelp.whirlpool.com/?title=Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Load_%26_Go%E2%84%A2_Bulk_Dispenser_-_All-In-One_Washer_Dryer
After a period of using your washer/dryer, you may find some residue buildup in the Load & Go™ bulk dispenser. To remove residue from the dispensers, lift the handle on the dispenser container housing...

Start/Pause Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Start%2F%2FPause_Button/Start%2F%2FPause_Button_-_Front_Load_Washer
Start/Pause Button To Start a cycle: Touch and hold for three seconds until the light above Start/Pause illuminates. When you start a cycle, the door will lock, the washer will sense the load size, an...

FdL or F29 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/FdL_or_F29_-_Error_Code_-_Compact_Front_Load_Washer
Firmly press the door in the area of the door lock. If the Hot cycle is selected, wait until cool-down and touch and hold the Power button again for at least 3 seconds. If the Error Code still appears...

Water Splashing Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Water_Splashing_Noise_-_Front_Load_Washer
Possible Solutions Water splashing/sloshing sounds: You may hear water splashing/sloshing noises while the water sprays and splashes as the machine fills and tumbles during washing. These sounds are p...

Drain Option - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Utility_Cycles/Drain_Option_-_All-In-One_Washer_Dryer
Possible Solutions Drain Use the Drain cycle when you need to eliminate excessive water in the machine. This could occur if the machine went off balance and would not spin. You may need to drain it be...

Water Level Using the Casual, Heavy Duty, or Deep Water Wash Cycles - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Water_Level/Water_Level_Using_the_Casual%2C_Heavy_Duty%2C_or_Deep_Water_Wash_Cycles_-_Top_Load_Washer
The washer senses the size of the load and adds the correct amount of water for the load size. If your model has this, you can set the Water Level knob to the Deep Water Wash setting and the washer wi...

Cleaning the Load & Go™ Bulk Dispenser - All-In-One Washer Dryer
https://producthelp.whirlpool.com/?title=Laundry/All-In-One_Washer_Dryer/Bulk_Dispenser_Operation/Cleaning_the_Load_%26_Go%E2%84%A2_Bulk_Dispenser_-_All-In-One_Washer_Dryer
After a period of using your washer/dryer, you may find some residue buildup in the Load & Go™ bulk dispenser. To remove residue from the dispensers, lift the handle on the dispenser container housing...

Fod or F18 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/Fod_or_F18_-_Error_Code_-_Compact_Front_Load_Washer
Using non-HE detergent or more than the manufacturer's recommended amount of detergent can cause excessive suds. The excess suds can cause the washer to run at a reduced spin speed, resulting in very ...

Clicking or Locking Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Clicking_or_Locking_Noise_-_Front_Load_Washer
Possible Solutions Clicking, Clacking or Locking Noise: When Start/Pause is touched, the washer will chime, indicating it is starting. The drum will make a partial turn. The door will click when it lo...

Cleaning the Bulk Dispenser - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Cleaning_the_Bulk_Dispenser_-_Front_Load_Washer
Recommendations It is recommended that you rinse out the Load & Go™ containers when refilling, when changing detergent types or concentrations, or when the washer will not be used for an extended peri...

Not Rising Well - Electronic Touch Control - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Not_Rinsing_Well/Not_Rising_Well_-_Electronic_Touch_Control_-_Top_Load_Washer
As you touch the Soil Level pad, the cycle time (minutes) will increase or decrease in the Estimated Time Remaining display and a different wash time will appear. Rinse and spin is a cycle used for lo...

F9 E1 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F9_E1_Error_code_for_top_load_washers
Did you receive a F9 E1 or DRN long drain alert? If F9 E1 (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. Also make sure that the drain hose ...

Other "F" only codes - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/Other_%22F%22_only_codes/Other_%22F%22_only_codes_-_Front_Load_Washer
Possible Solutions “F” codes other than F20, F21, or F22 Select PAUSE/CANCEL twice to cancel the cycle. Select DRAIN/SPIN if there is excessive water in the washer. Re-select cycle and press START. If...

Door is Locked at the End of the Wash Cycle - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Door_Questions_or_Concerns/Door_is_Locked_at_the_End_of_the_Wash_Cycle_-_All-In-One_Washer_Dryer
Possible Solutions There are several reasons the door may still be locked after the Wash portion of the cycle is complete: Water remaining in the tub Tumble Fresh™ option is on Unit has started Dry Mo...

Using the Load & Go™ Bulk Dispenser
https://producthelp.whirlpool.com/?title=Laundry/All-In-One_Washer_Dryer/Product_Info/Product_Assistance/Using_the_Load_%26_Go_Bulk_Dispenser
Follow the steps below to fill the Load & Go™ bulk dispenser when using the washer for the first time, or when the low detergent icon or low fabric softener icon on the display indicate that the deter...

Spin Option- All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Utility_Cycles/Spin_Option-_All-In-One_Washer_Dryer
Possible Solutions Spin Use the Spin only cycle when you have something that does not need washing such as wet towels. This cycle can also be used when the All in One Washer and Dryer has gotten off b...

Unlocking the Door Manually - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Door_Concerns/Unlocking_the_Door_Manually__-_Compact_Front_Load_Washer
The door may unlock by itself after the failure condition no longer exists; however, if you want to take out your laundry immediately, first try to unlock the door as described in Error Code FdL or F2...

Using Auto Sensing (on some models) Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Water_Level/Using_Auto_Sensing_(on_some_models)_Cycle_-_Top_Load_Washer
Using Auto Sensing (on some models) Set the Water Level knob to the Auto Sensing setting and the washer will fill to a level that ensures the load engages the agitator. From this point, the electronic...

F1E4 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F1E4_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Main Relay Error The F1E4 Error Code indicates there may be a problem with the main relay. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 minute and ...

F3E3 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F3E3_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Air Inlet Control issue The F3E3 Error Code indicates that there may be an issue with the Air Inlet function. The wash function will operate, but the dry function will not operate. ...

Continuously Fills or Fills and Drains - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Not_Filling_or_Takes_too_long_to_fill/Continuously_Fills_or_Fills_and_Drains_-_All-In-One_Washer_Dryer
The drain hose may be too far down inside the drainpipe (standpipe) or laundry tub. Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length o...

F3E2 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F3E2_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Temperature Control issue The F3E2 Error Code indicates that there may be an issue with the Temperature Control sensor. Try resetting the washer/dryer by unplugging it from the outl...

Spotting or Discoloration on my Clothing
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Spotting_or_Discoloration_on_my_Clothing
When washing smaller loads, be sure to use the correct amount of fabric softener appropriate for the load size. Fill dispenser no higher than the fill line - if more is added, fabric softener will dis...

Clicking Sound - All-in-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Vibration_and_Sounds/Clicking_Sound_-_All-in-One_Washer_Dryer
Clicking noise(s) can be caused by several things: The door will lock, unlock, and lock again. Loose items such as coins could fall between washer/dryer drum and tub or may block pump. It may be neces...

F4E3 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F4E3_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Dryer Fan Failure The F4E3 Error Code indicates that there may be an issue with the dryer blower motor. The wash function will operate, but the dry function will not operate. Try re...

F4E2 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F4E2_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Dryer Heater Failure The F4E2 Error Code indicates that there may be an issue with the dryer heater circuit. The wash function will operate, but the dry function will not operate. T...

WiFi Terms and Conditions - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Info/WiFi_Terms_and_Conditions_-_All-In-One_Washer_Dryer
Possible Solutions WiFi Terms and Conditions Press this option to read the terms and conditions of the WiFi operation and usage within the All in One Washer and Dryer. Follow the prompts as necessary.

F5E2 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F5E2_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Door Lock will not Lock The F5E2 Error Code indicates that there may be an issue with the door lock. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 m...

F5E3 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F5E3_-_Error_Code_-_All-In-One_Washer_Dryer
Possible Solutions Door Lock will not Unlock The F5E3 Error Code indicates that there may be an issue with the door lock. Try resetting the washer/dryer by unplugging it from the outlet for at least 1...

VIDEO: Tips for Washing Rugs
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Tips_for_Washing_Rugs
Washing Rugs in your Whirlpool Washer

Software Terms and Conditions - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Info/Software_Terms_and_Conditions_-_All-In-One_Washer_Dryer
Possible Solutions Software Terms and Conditions Press this option to read the terms and conditions of the software used within this All in One Washer and Dryer. Follow the prompts as necessary.

VIDEO: Rattling or Banging Sound
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Rattling_or_Banging_Sound
Whirlpool Washer Rattling or Banging Sound Refer to the video below for an example of the fill hoses rattling against the washing machine:

VIDEO: Grinding or Rubbing Noise
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Grinding_or_Rubbing_Noise
Grinding or Rubbing Noise on my Whirlpool Top Load Washer

Bulk Dispenser with Detergent and Fabric Softener or 2 Detergent Compartments - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dispenser_Info/Bulk_Dispenser_in_Bottom_Drawer/Bulk_Dispenser_with_Detergent_and_Fabric_Softener_or_2_Detergent_Compartments_-_Front_Load_Washer
The Load & Go™ dispenser gives you the convenience of not having to add HE detergent and fabric softener to the wash load every time. It also determines the best time and amount to add the detergent t...

VIDEO: Gurgling or Slurping Sounds during Drain
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Gurgling_or_Slurping_Sounds_during_Drain
Whirlpool Washer Gurgling or Slurping Sounds during Drain

F5E1 - Error Code - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Error_Codes/F5E1_-_Error_Code_-_All-In-One_Washer_Dryer
Door Lock Issue The F5E1 Error Code indicates that there may be an issue with the door switch/door lock. The door is unlocked during a cycle when it should be locked. Try resetting the washer/dryer by...

Cleaning the Drain Pump Filter/Draining Residual Water
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water
Open the drain pump filter access door at the bottom right corner at the front of the washer/dryer. Place a broad, flat pan beneath the drain pump filter to collect the drain water. Pull out the black...

Clothing feels Damp at the end of the Dry Cycle - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dry_Function_Option/Clothing_feels_Damp_at_the_end_of_the_Dry_Cycle_-_Front_Load_Washer
Because the Washer's dry function has nowhere to vent the moist air, your clothing may still feel slightly damp at the end of the cycle. However, try removing them OR let the clothes sit in the washer...

Cleaning the Lint Screen - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Lint_Screen_-_All-In-One_Washer_Dryer
Possible Solutions No Lint Screen to Clean The All-in-One Washer and Dryer has no lint screen. Any accumulated lint is rinsed, and then flushed out during the rinse cycle. Clean the inner door glass a...

Changing Detergent or Softener - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Bulk_Dispenser_Operation/Changing_Detergent_or_Softener_-_All-In-One_Washer_Dryer
Touch the TOOLS button to access the Tools screen, which contains the following (you may need to scroll down with your finger to access all of the selections). If changing dispenser 2 from detergent t...

F20 or F60 - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/F20_or_F60_-_Error_Code_-_Compact_Front_Load_Washer
You may see this symbol (illuminated in red): Possible Solutions Turn off and unplug the washer. Close the water faucet. See the “Assistance or Service” section to contact a service representative in ...

Sound Volume Options - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Preferences/Sound_Volume_Options_-_All-In-One_Washer_Dryer
Select the Sound Volume to do the following: Adjust the loudness or softness of the audio tones Adjusts the loudness or softness of the tones when you have them unmuted Does not mute or unmute the ton...

VIDEO: How to use the FanFresh® cycle
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_use_the_FanFresh%C2%AE_cycle
Using the FanFresh® cycle on Your Whirlpool Washer

VIDEO: Humming or Whirling Sounds during Agitation, Wash or Spin
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Humming_or_Whirling_Sounds_during_Agitation%2C_Wash_or_Spin
Humming/Whirling Noises during Agitation, Wash or Spin on my Whirlpool Washer Refer to the video below to hear the humming noise:

Water Remains in Dispenser Area - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Water_Remains_After_Cycle_is_Complete/Water_Remains_in_Dispenser_Area_-_Front_Load_Washer
A small amount of water within the dispenser area after a cycle is normal. If larger amounts of water, detergent, or fabric softener remain, remove the dispenser and clean thoroughly. After you have t...

F2 E3 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F2_E3_Error_code_for_top_load_washers
Possible Solutions Did you receive a F2 E3 alert? The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait two minu...

An Overview of Control 2019 or After - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/An_Overview_of_Control_2019_or_After_-_Front_Load_Washer
If your control looks like the one below, check the next column for more information: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selec...

F2 E3 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F2_E3_Error_code_for_top_load_washers
Possible Solutions Did you receive a F2 E3 alert? The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait two minu...

F1 E1 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F1_E1_Error_code_for_top_load_washers
Possible Solutions Did you receive a F1 E1 alert? The F1 E1 alert indicates there is an issue with the appliance control unit or associated wiring. Unplug the washer, wait two minutes, then plug back ...

F2 E4 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F2_E4_Error_code_for_top_load_washers
Possible Solutions Did you receive a F2 E4 alert? The F2 E4 alert indicates there is an issue with the user interface or associated wiring. Unplug the washer, wait two minutes, then plug back in. CLIC...

VIDEO: Humming or Whirling Sounds at the Start of the Wash Cycle
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Humming_or_Whirling_Sounds_at_the_Start_of_the_Wash_Cycle
Humming or Whirling Sounds at the Start of the Wash Cycle on your Whirlpool Top Load Washer Refer to the video below for an example of humming/whirling sounds that happen at the beginning of the cycle...

F2 E5 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F2_E5_Error_code_for_top_load_washers
Possible Solutions Did you receive a F2 E5 alert? The F2 E5 alert indicates there is an issue with the user interface or associated wiring. Unplug the washer, wait two minutes, then plug back in. CLIC...

Detergent Level Indicator Light - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dispenser_Info/Dispenser_Questions/Detergent_Level_Indicator_Light_-_Front_Load_Washer
Detergent Level Low – This will light (yellow) if there is enough detergent in the Load & Go™ cartridge for only a few more cycles. Empty – This will light (red) if there is no detergent in the Load &...

F5 E2 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F5_E2_Error_code_for_top_load_washers
Possible Solutions Did you receive a F5 E2 lid lock alert? The F5 E2 alert indicates the washer can't engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid...

Gurgling, Slurping or Humming Noise - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Noise/Gurgling%2C_Slurping_or_Humming_Noise_-_Error_Code_-_Compact_Front_Load_Washer
There will be some noise during the drain portion of the cycle. During drain, the washer pump will continuously run to remove the water released from the load. Due to this continuous running, the pump...

Normal, Delicate, Eco or Quick Wash Cycles - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Water_Level_Questions/Normal%2C_Delicate%2C_Eco_or_Quick_Wash_Cycles__-_Stacked_Laundry_Center
Delicate or Hand Wash cycles: the washer will fill to about 1/2 full. Whites, Heavy Duty, Deep Water Wash, Power Wash, and Super Wash cycles: the washer will fill to about 1/2 full. Quick Wash or Expr...

Timed Dry or Auto Dry - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Dryer_Cycle_Questions_or_Concerns/Timed_Dry_or_Auto_Dry_-_All-In-One_Washer_Dryer
Difference between Auto Dry and Timed Dry: Timed Dry With Timed Dry, the washer/dryer runs the amount of time set. If you set Timed Dry for 3 hours, it will run for 3 hours. Use Timed Dry for the occa...

F# E# or other F codes (not on this list) - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F%23_E%23_or_other_F_codes_(not_on_this_list)/F%23_E%23_or_other_F_codes_(not_on_this_list)_-_Front_Load_Washer
Possible Solutions F# E# Error Codes or F## other than any described above: If you receive an error code of F followed by a number, or an F and E followed by numbers, this is a system error. To remove...

F5 E3 Error code for top load washers
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F5_E3_Error_code_for_top_load_washers
Did you receive a F5 E3 lid unlock alert? The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and cl...

Cycle Time is Not Advancing - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Cycle_Time_is_Not_Advancing/Cycle_Time_is_Not_Advancing_-_Compact_Front_Load_Washer
The time displayed during a cycle is an estimate of the time to complete the load. The excess suds can cause the washer to run a "suds lock", which means it will add more water to try to reduce the am...

Normal, Delicate, Eco or Quick Wash Cycles - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Not_Filling_or_Long_Fill/Normal%2C_Delicate%2C_Eco_or_Quick_Wash_Cycles_-_Top_Load
Delicate or Hand Wash cycle will result in a deeper fill wash, - the washer will fill about 1/2 full. Whites, Heavy Duty, Deep Water Wash, Power Wash, and Super Wash will also fill to about 1/2 full. ...

Humming or Whirling - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Noise%2F%2FSounds/Humming_or_Whirling_-_Stacked_Laundry_Center
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

VIDEO: Cleaning the Load & Go Dispenser Drawer
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Videos/VIDEO:__Cleaning_the_Load_%26_Go_Dispenser_Drawer
How to Clean the Load & Go Dispenser Drawer on my Whirlpool Top Load Washer

Normal, Delicate, Eco or Quick Wash Cycles - Water Level - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Water_Concerns/Water_Level_Questions/Normal%2C_Delicate%2C_Eco_or_Quick_Wash_Cycles_-_Water_Level_-_Top_Load
Delicate or Hand Wash cycle will result in a deeper fill wash, - the washer will fill about 1/2 full. Quick Wash or Express Wash will be a minimum fill - only a few inches of water in the bottom of th...

Excessive Detergent or Suds - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Excessive_Detergent_or_Suds_-_Top_Load
Using non-HE detergent or more than the manufacturer's recommended amount of detergent can cause excessive suds. The excess suds can cause the washer to run at a reduced spin speed, resulting in very ...

Humming or Whirling Noise - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Noise_and_Sounds/Humming_or_Whirling_Noise_-_Top_Load
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

Cleaning your Load & Go™ Dispenser - Top Load Washer
https://producthelp.whirlpool.com/?title=Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Cleaning_your_Load_%26_Go%E2%84%A2_Dispenser_-_Top_Load_Washer
Load & Go™ Dispenser You may find laundry product residue left over in your dispenser drawer. Gently pull the Load & Go™ drawer past the drawer stop and out of the washer. IMPORTANT: Load & Go™ drawer...

Dual Bulk Detergent Dispenser - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dispenser_Info/Bulk_Dispenser_in_Bottom_Drawer/Dual_Bulk_Detergent_Dispenser_-_Front_Load_Washer
The Load & Go™ dispenser gives you the convenience of not having to add HE detergent and fabric softener to the wash load every time. It also determines the best time and amount to add the detergent t...

7. Cycle Options - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/7.__Cycle_Options_-_Front_Load_Washer
The washer will automatically activate the fan after the cycle ends and tumble the load periodically for up to 12 hours. Load & Go™ (on some models) - Touch to select this option If you want to automa...

Clean Filter - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/Clean_Filter_-_Error_Code_-_Compact_Front_Load_Washer
Install the washer in a room with an ambient temperature of at least 41°F (5°C). Clean the drain pump filter as described in the “Cleaning the Drain Pump Filter/Draining Residual Water” section of you...

Vibration - Washing Mulitple Items - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Vibration/Vibration_-_Washing_Mulitple_Items_-_Top_Load
If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the basket which will result in noise and vibration. Always check the care label to make sure...

Grinding or Rubbing - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Noise%2F%2FSounds/Grinding_or_Rubbing_-_Stacked_Laundry_Center
It is important to follow the steps in the installation instructions for leveling the washer. It is important that the clothes have enough room to move around freely to allow the wash basket room to m...

Grinding or Rubbing Noise - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Noise_and_Sounds/Grinding_or_Rubbing_Noise_-_Top_Load
Typically, a grinding or rubbing noise will only occur in the agitation/wash or spin portions of the cycle. It is important to follow the steps in the installation instructions for leveling the washer...

Not Cleaning Clothing - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Wash_Performance_or_Clothing_Results_are_not_Optimal/Not_Cleaning_Clothing_-_Stacked_Laundry_Center
Do not place load items on top of the bleach dispenser when loading and unloading the washer (on some models). You can also use the Casual or Delicate cycle to increase the washer's water level to hel...

Temperature and Spin Speed - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Home_Button/Temperature_and_Spin_Speed_-_All-In-One_Washer_Dryer
Tap the Temperature setting from the Home page based on the clothing you are washing. Depending on what part of the country you live, and the time of year, your cold tap water (ground water) could be ...

Visibly Failed, Broken or Missing Parts - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Visibly_Failed%2C_Broken_or_Missing_Parts/Visibly_Failed%2C_Broken_or_Missing_Parts_-_Front_Load_Washer
Visibly Failed, Broken or Missing Parts Only use this section of Guided Help if the Customer stated the part has visibly failed, is broken or is missing. Most of all the parts listed can be installed ...

Cleaning the Drain Pump Filter - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Drain_Pump_Filter_-_All-In-One_Washer_Dryer
Open the drain pump filter access door at the bottom right corner at the front of the washer/dryer. Place a broad, flat pan beneath the drain pump filter to collect the drain water. Pull out the black...

Removing Stains from Fabrics
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Removing_Stains_from_Fabrics
If the stain is on a non-washable fabric, take it to the dry cleaner as soon as possible. Tell them the stain and the fiber content of the garment. Apply stain remover to the underside of the stain, f...

Detergent Concentration Information - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Bulk_Dispenser_Operation/Detergent_Concentration_Information_-_All-In-One_Washer_Dryer
Tap which dispenser you are using, then select the concentration level based on the detergent that you are using. NOTE: Concentration Level does not mean the dispenser will dispense that many doses of...

Water Tap is Closed - Error Code - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Error_Codes/Water_Tap_is_Closed_-_Error_Code_-_Compact_Front_Load_Washer
Water tap closed (inlet faucet) Water faucet is closed. Water faucet pressure is too low. Water inlet hose is frozen up. Make sure there are no kinks in the inlet hose. Make sure water pressure is suf...

Using the Single Load Dispenser Drawer - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Other/Dispenser_Info/Dispenser_Questions/Using_the_Single_Load_Dispenser_Drawer_-_Front_Load_Washer
The single load dispenser drawer gives you the convenience of adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time. This compartment automaticall...

24 Inch Wide model with Electronic Controlled Washer - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Control_Panel_Operation_(on_some_models)/24_Inch_Models/24_Inch_Wide_model_with_Electronic_Controlled_Washer_-_Stacked_Laundry_Center
24 Inch Wide model with Electronic Controlled Washer Is this your model? If you have one of these models: WET4024HW WET4124HW YWET4024HW And your dryer control panel looks like the one below, click in...

Leaking from Underneath or Bottom
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Water_Dripping/Leaking_from_Underneath_or_Bottom
Check to see if the water is coming from where the inlet hose is connected to the washer and to the house water supply. If clogged or slow, the water can back up out of the drainpipe or sink. By addin...

Water Level Questions - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Water_Concerns/Water_Level_Questions/Water_Level_Questions_-_Top_Load
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

FanFresh - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/FanFresh_-_Washer
FanFresh FanFresh ® What it does: Lets you remotely activate the FanFresh® cycle, which activates a fan and tumbles clothes periodically after the cycle ends. What it does for you: Helps keep wrinkles...

Removing Stains from Fabrics
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Tips_and_Tricks/Removing_Stains_from_Fabrics
If the stain is on a non-washable fabric, take it to the dry cleaner as soon as possible. Tell them the stain and the fiber content of the garment. Apply stain remover to the underside of the stain, f...

Spotting or Discoloration on Clothing
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Tips_and_Tricks/Spotting_or_Discoloration_on_Clothing
When washing smaller loads, be sure to use the correct amount of fabric softener appropriate for the load size. Fill dispenser no higher than the fill line - if more is added, fabric softener will dis...

Clothing Still Feels Damp at the End of the Cycle
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Tips_and_Tricks/Clothing_Still_Feels_Damp_at_the_End_of_the_Cycle
Because the Whirlpool Washer/Dryer's Ventless dry system has nowhere to vent the moist air, your clothing may still feel slightly damp at the end of the cycle. In most circumstances, the moisture will...

Not Filling or Long Fill Times - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Not_Filling_or_Long_Fill/Not_Filling_or_Long_Fill_Times_-_Top_Load
Check the household faucets to see if the hot and cold water household water supply lines are turned on. Turn off water supply and disconnect hose from the back of the washer to check the screens. Use...

Clothes Wrinkled - Steam Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Top_Load_Dryer_WOD/Drying_Performance/Wrinkled_Clothing/Steam_Dryer/Clothes_Wrinkled_-_Steam_Dryer
If the load sits for too long after the end of the cycle, wrinkles can set into the fabrics. For best drying and wrinkle results, untangle items from the washer and separately add them into the dryer....

Wrinkled Clothing - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Dryer_questions_or_concerns/Wrinkled_Clothing/Wrinkled_Clothing_-_Stacked_Laundry_Center
If the load sits for too long after the end of the cycle, wrinkles can set into the fabrics. For best drying and wrinkle results, untangle items from the washer and separately add them into the dryer....

Clothes Wrinkled - Traditional Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Top_Load_Dryer_WOD/Drying_Performance/Wrinkled_Clothing/Traditional_Dryer/Clothes_Wrinkled_-_Traditional_Dryer
If the load sits for too long after the end of the cycle, wrinkles can set into the fabrics. For best drying and wrinkle results, untangle items from the washer and separately add them into the dryer....

Clothing is Wrinkled - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Clothing_is_Wrinkled_-_Top_Load
Make sure the hot-water inlet hose is connected to the hot-water faucet and that the cold-water inlet hose is connected to the cold-water faucet. To reduce tangling and twisting, the load items need t...

Clothes Wrinkled Using Auto Dry Cycle - Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Top_Load_Dryer_WOD/Drying_Performance/Wrinkled_Clothing/Steam_Dryer/Clothes_Wrinkled_Using_Auto_Dry_Cycle_-_Dryer
If the load sits for too long after the end of the cycle, wrinkles can set into the fabrics. Items going into the dryer twisted or tangled will take longer to dry and are more likely to come out of th...

Damaged Clothing - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Damaged_Clothing_-_Top_Load
This washer is designed to use the Bulky or Sheets/Bedding cycle for bulky clothing items or bedding. When washing these types of clothing items (including heavy coats or blankets), do not use the Nor...

Wrinkled Clothing - HybridCare Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/HybridCare_Dryer/Drying_Performance/Wrinkled_Clothing/Wrinkled_Clothing_-_HybridCare_Dryer
Depending on whether you selected an Auto or Timed Dry cycle, try using the Wrinkle Shield setting to help avoid wrinkling of clothing after the cycle is completed. If the load sits for too long after...

Wrinkled Clothing - Compact Heat Pump Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Compact_Heat_Pump_Dryer/Drying_Performance/Wrinkled_Clothing/Wrinkled_Clothing_-_Compact_Heat_Pump_Dryer
If the load sits for too long after the end of the cycle, wrinkles can set into the fabrics. For best drying and wrinkle results, untangle items from the washer and separately add them into the dryer....

Lint on Clothing - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Lint_on_Clothing_-_Top_Load
The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to tumble freely. A tightly packed load of laundry is more like...

Leveling a Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Installation_Support/Leveling_a_Stacked_Laundry_Center
If washer/dryer is not level, prop up front of washer/dryer about 4" (102 mm) with a wood block or similar object that will support weight of washer/dryer. On 27" models, use a 9/16" or 14 mm open-end...

Vibration - Washing a Single Items - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Vibration/Vibration_-_Washing_a_Single_Items_-_Top_Load
The washer must be level and all four washer feet must be in firm contact with the floor. If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the...

How to Move a Washing Machine - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_and_Maintenance/How_to_Move_a_Washing_Machine_-_Top_Load
If the washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. Drape power cord and drain hose over the console and secure with masking tape. Place foam pack...

Lint on Clothing - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Wash_Performance_or_Clothing_Results_are_not_Optimal/Lint_on_Clothing__-_Stacked_Laundry_Center
Review the following to help resolve issues of lint on clothing: The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry item...

How to Move a Washing Machine - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_and_Maintenance/How_to_Move_a_Washing_Machine_-_Top_Load
If the washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. Drape power cord and drain hose over the console and secure with masking tape. Place foam pack...

Removing Odor or Smells - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Odor_or_Smell/Removing_Odor_or_Smells_-_Stacked_Laundry_Center
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on (on some models)? The Clean Washer cycle, which is available on some models, uses higher water volumes in combinati...

Buy Supplies - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Buy_Supplies_-_Washer
Buy Supplies What it does: This allows you to order accessories like affresh ® cleaners through the app. If you need help with your connected appliance please1-866-333-4591.

Winter Storage Care for a Washing Machine - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_and_Maintenance/Winter_Storage_Care_for_a_Washing_Machine_-_Top_Load
Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and remaining water. To reinstall washer after non-use, vacation, winter s...

Casual, Heavy Duty, or Deep Water Wash - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Water_Level_Questions/Casual%2C_Heavy_Duty%2C_or_Deep_Water_Wash_-_Stacked_Laundry_Center
The washer senses the size of the load and adds the correct amount of water for the load size. If your model has this, you can set the Water Level knob to the Deep Water Wash setting and the washer wi...

Damaged Clothing - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Wash_Performance_or_Clothing_Results_are_not_Optimal/Damaged_Clothing_-_Stacked_Laundry_Center
Mend rips and broken threads in seams before washing items to help avoid damage to clothing. Also check inside the washer for loose items that could snag fabrics and damage clothing. Were strings, sas...

Casual, Heavy Duty, or Deep Water Wash Cycles - Water Level - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Water_Concerns/Water_Level_Questions/Casual%2C_Heavy_Duty%2C_or_Deep_Water_Wash_Cycles_-_Water_Level_-_Top_Load
The washer senses the size of the load and adds the correct amount of water for the load size. If your model has this, you can set the Water Level knob to the Deep Water Wash setting and the washer wi...

Cleaning the Interior - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_and_Maintenance/Cleaning_the_Interior_-_Top_Load
CLICK HERE for more information on the importance of using HE detergent Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? Run the Clean Washer cycle every month to ...

Not Spinning - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Not_Spinning_or_Wet_Clothes/Not_Spinning_-_Top_Load
If not, the load may become unbalanced, causing the washer to not spin properly. If Low Spin or No Spin was selected, the washer may not remove enough water from the load. Pausing the machine later in...

Wet Clothes at the End of the Cycle - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Not_Spinning_or_Wet_Clothes/Wet_Clothes_at_the_End_of_the_Cycle_-_Top_Load
If the power failed during the spin cycle, it's possible that the washer did not ramp up to full spin speed. Pausing the machine later in the cycle could cause limitations on the washer running at max...

Not Spinning or Wet Clothes - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Not_Spinning_or_Wet_Clothes_at_the_End_of_the_Cycle/Not_Spinning_or_Wet_Clothes_-_Stacked_Laundry_Center
If the power failed during the spin cycle, it's possible that the washer did not ramp up to full spin speed. Use the U-shaped drain hose form on the drain hose and securely attach to drainpipe (standp...

Noise/Sounds - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Noise_and_Sounds/Noise%2F%2FSounds_-_Top_Load
There will be different kinds of humming and whirring sounds as the washplate moves the load and as the basket is slowing down to stop. And sometimes, you may hear nothing at all, as the washer determ...

Manuals and Literature - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Manuals_and_Literature__-_Washer
Manuals and Literature What it does: Allows you to easily locate your Owner's Manual or Installation instructions from your mobile device. If you need help with your connected appliance please1-866-33...

Normal Noises and Sounds - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Noise%2F%2FSounds/Normal_Noises_and_Sounds_-_Stacked_Laundry_Center
For example, you may hear a clicking and hum at the beginning of the cycle, as the lid lock goes through a self-test. There will be different kinds of humming and whirring sounds as the washplate move...

Wash Status Indicator Lights - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Control_Panel_Operation_(on_some_models)/27_Inch_Models/Wash_Status_Indicator_Lights__-_Stacked_Laundry_Center
Once sensing is complete, the washer will fill to the appropriate level for the detected load size and then begin the wash phase of the cycle. If the lid is left open for more than 10 minutes, the was...

Rattling - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Noise%2F%2FSounds/Rattling_-_Stacked_Laundry_Center
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

Not Rinsing Well - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Not_Rinsing_Well_-_Top_Load
This cycle should be run approximately 1 time per month (using the Affresh® Washer cleaner), and this will re-calibrate the control every time the Clean Washer cycle is used. As you touch the Soil Lev...

Cleaning Performance or Clothing Results Questions
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Cleaning_Performance_or_Clothing_Results_Questions
There are a few potential causes of what is commonly referred to as "white residue". White residue can be caused by one or a combination of the following: If your washer water is too cold, it may not ...

Clothing has White Residue - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Wash_Performance_or_Clothing_Results_are_not_Optimal/Clothing_has_White_Residue_-_Stacked_Laundry_Center
There are a few potential causes of what is commonly referred to as "white residue". White residue can be caused by one or a combination of the following: If your washer water is too cold, it may not ...

Wash Cycle Knob - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Control_Panel_Operation_(on_some_models)/27_Inch_Models/Wash_Cycle_Knob__-_Stacked_Laundry_Center
Please note that the movement (turning) of the Dryer Cycle knob is different than the movement (turning) of the Washer Cycle knob. The dryer knob will feel "stiffer" to rotate than the washer knob due...

Removing Odors or Smells - Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Front_Load_Dryer/Cleaning_and_Maintenance/Removing_Odors_or_Smells_-_Dryer
When odors or fumes are gone from the area, rewash and dry the load. The odor is on the load because the dryer pulls in surrounding room air to dry the load. To avoid this, do not run the dryer while ...

Lights Blinking on a Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Product_Assistance/Lights_Blinking_on_a_Stacked_Laundry_Center
Lights Blinking on your Whirlpool Stacked Laundry Center If you just installed the Stacked Laundry Center, and it does not seem to be working properly, the control may need to be reset. Sometimes the ...

Fill or Sensing light On - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Error_Codes_or_Flashing_Lights/Fill_or_Sensing_light_On_-_Top_Load
When the Start/Stop button is pressed, and the Water Level knob is set to Auto Sensing, the washer will fill and begin sensing to determine load size and balance. Once sensing is complete, the washer ...

Fill/Sensing light on - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Lights_on_or_Flashing_(on_some_models)/Fill%2F%2FSensing_light_on_-_Stacked_Laundry_Center
When the Start/Stop button is pressed, and the Water Level knob is set to Auto Sensing, the washer will fill and begin sensing to determine load size and balance. Once sensing is complete, the washer ...

Odor or Smell in Dryer
https://producthelp.whirlpool.com/Laundry/Dryers/Top_Load_Dryer_WOD/Cleaning_and_Maintenance/Odor_or_Smell_in_Dryer
The odor is on the load because the dryer pulls in surrounding room air to dry the load. To avoid this, do not run the dryer while painting, varnishing or refinishing near the dryer. A wet load left i...

Not Draining - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Not_Draining/Not_Draining_-_Top_Load
Verify that the drain hose is not too far down into the standpipe beyond the elbow which could cause siphoning, water to drain back into the tub or slow or no spin. Using the U-shape drain hose form (...

Knocking, Hammering, or Thumping - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Noise%2F%2FSounds/Knocking%2C_Hammering%2C_or_Thumping_-_Stacked_Laundry_Center
Typically, a knocking or thumping noise will only occur during agitation/wash and spin portions of the cycle. There will be a knocking/thumping noise as the drive system shifts from agitation mode to ...

Washer Videos
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos

No Power - Will Not Turn on - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Not_Starting_or_Not_Operating/No_Power_-_Will_Not_Turn_on_-_Stacked_Laundry_Center
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If the washer is on a fuse box, check ...

Clothing is Tangled - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cleaning_Performance/Clothing_is_Tangled_-_Top_Load
The wash load must be sorted before starting the washer. Mix different sized items together (such as shirts and pants) for a more balanced load. This washer automatically selects the spin speed based ...

Knocking or Thumping Noise - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Noise_and_Sounds/Knocking_or_Thumping_Noise_-_Top_Load
Typically, a knocking or thumping noise will only occur during agitation/wash, and spin portions of the cycle. There will be a knocking/thumping noise as the drive system shifts from agitation mode to...

Removing Odors or Smell - Dryers
https://producthelp.whirlpool.com/Laundry/Dryers/oad_Dryer_(Vmax%2F%2FAdvantage)/Odors/Removing_Odors_or_Smell_-_Dryers
When odors or fumes are gone from the area, rewash and dry the load. The odor is on the load because the dryer pulls in surrounding room air to dry the load. To avoid this, do not run the dryer while ...

Show Amore results

Product Registration

Find A Retailer

Service & Support

Products

Parts, Accessories & Other Products

About Whirlpool Corporation

This online merchant is located in the United States at 600 West Main Street, Benton Harbor, MI 49022.

MSRP is the Manufacturer's Suggested Retail Price, which may differ from actual selling prices in your area.

Whirlpool Washer

Repair Articles

All results

About 1138 results

More

More

More

More

More

More

More

More

Washerhttps://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More

VIDEO: HE Top Load Washer - Floating Washer Baskethttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__HE_Top_Load_Washer_-_Floating_Washer_BasketHow your Whirlpool Floating Washer basket works

More

More

More

More

More

More

More

More

More

VIDEO: Washer Hose Noisehttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Washer_Hose_NoiseWhirlpool Washer Hose Noise

More

More

More

VIDEO: How to Level a Washerhttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Level_a_WasherLeveling your Whirlpool Washer

More

More

More

More

More

More

VIDEO: How to use an HE washerhttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_use_an_HE_washerUsing your Whirlpool High Efficiency (HE) Washer

More

More

More

More

More

More

More

More

VIDEO: Install Washer on Level Groundhttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Install_Washer_on_Level_GroundInstall your Whirlpool Washer on Level Ground

More

More

VIDEO: Normal Top Load Washer Fill Soundhttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Normal_Top_Load_Washer_Fill_SoundNormal Washer Fill Sound on my Whirlpool Top Load Washer

More

More

More

More

More

VIDEO: How to Install Washer Drain Hosehttps://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Install_Washer_Drain_HoseInstalling a Whirlpool Washer Drain Hose

More

More

More

More

More

More

Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer

VIDEO: HE Top Load Washer - Floating Washer Basket
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__HE_Top_Load_Washer_-_Floating_Washer_Basket
How your Whirlpool Floating Washer basket works

VIDEO: Washer Hose Noise
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Washer_Hose_Noise
Whirlpool Washer Hose Noise

VIDEO: How to Level a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Level_a_Washer
Leveling your Whirlpool Washer

VIDEO: How to use an HE washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_use_an_HE_washer
Using your Whirlpool High Efficiency (HE) Washer

VIDEO: Install Washer on Level Ground
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Install_Washer_on_Level_Ground
Install your Whirlpool Washer on Level Ground

VIDEO: Normal Top Load Washer Fill Sound
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Normal_Top_Load_Washer_Fill_Sound
Normal Washer Fill Sound on my Whirlpool Top Load Washer

VIDEO: How to Install Washer Drain Hose
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Install_Washer_Drain_Hose
Installing a Whirlpool Washer Drain Hose

VIDEO: Loading a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Loading_a_Top_Load_HE_Washer
Loading your Whirlpool Top Load HE Washer